06 Jinma 354XL

   / 06 Jinma 354XL #1  

preid0gr

New member
Joined
Dec 26, 2022
Messages
1
Tractor
06 Jinma 354XL
Hello, I was out working with my tractor on the 24th moving snow when I put it in reverse, let the clutch out and nothing. Nothing for gear 1 either. Seemed that that the other gear sets were working. I have done some research and it sounds maybe like the 1st/Reverse gear fork. Up to that point the tractor has be solid and runs like a dream, note started at -10 with no issues. From what I have read, I should be able to take the cover off and see the issue but most of the post have been vague in stating what to look for once there. Here is my fear I will get in there, maybe even replace the fork and not have fixed the issue thus causing more damage. Any advice would be greatly appreciated. Thank you.
 
   / 06 Jinma 354XL #2  
Hello. I see you wrote this in December with no replies. I assume you have solved your problem by now. If not and if others with Jinma, FarmPro or others branded Jinmas ever have this issue (I have ran across it twice on the 30hp model) you should stop immediately, take off the top shifter plate and remove all parts of the broken fork, else you will experience broken gear teeth and have to tear down the entire tractor rear end and disassemble the transmission to repair.
 

Tractor & Equipment Auctions

UNVERFERTH 330 - 22-INCH EXTENTSION TUBE FOR BASE AND WING ASSEMBLY FOR RIPPER (A52748)
UNVERFERTH 330 -...
Homemade Flatbed Tilt Trailer (A50322)
Homemade Flatbed...
2025 Chery 10ft 15 Drawer 2 Cabinet Workbench (A50325)
2025 Chery 10ft 15...
2012 PETERBILT 365(INOPERABLE) (A52472)
2012 PETERBILT...
1990 GREAT DANE 28' REFER (A52472)
1990 GREAT DANE...
2011 Mack CHU613 T/A Wet Kit Day Cab Truck Tractor (A51692)
2011 Mack CHU613...
 
Top