I am hearing what I think to be gear chatter when I push the clutch in while mowing with my bush hog. No noise at all when I’m moving and mowing, only when I go to push the clutch in while the pto is spinning the mower.
Any ideas what this could be?
Here's the umpteenth 3-pt question: I decided to connect my ARPS 80 backhoe, has its own hydro pump, to my 240D with ~100lbs diff in spec'd weights; The 80 is less than the 240D's limit, but it simply won't lift it. I've had a 6' brush hog on and it lifts it. Checked/cleaned the screen and...
Here's the umpteenth 3-pt question: I decided to connect my ARPS 80 backhoe, has its own hydro pump, to my 240D with ~100lbs diff in spec'd weights; The 80 is less than the 240D's limit, but it simply won't lift it. I've had a 6' brush hog on and it lifts it. Checked/cleaned the screen and...
I recently did some work on the brakes of my YM240D. The left side was full of oil. I replaced the seal and no more leaks. I also replaced the shoes and springs with replacements from Hoye. The right side works really well. However, the left side is adjusted as far as it will go and still does...