woods bh80x

I have a Woods BH80X backhoe mounted (with subframe) on an L3400 Kubota. It has a pto pump and tank. I want to replace the filter on the pto system but can’t find any identifying numbers. Anyone have an idea what filter it takes?

After about two years of on and off looking and comparing the pros and cons of both new and used, I bought a tractor to replace / upgrade my old JD 770 with model 70 loader and Woods BH7500 backhoe. It was a bit of an ordeal to do while still complying with the travel restriction wishes of both...

Hello I posted a similar post on the Kubota owning and operating site didn't get much respons? So I'm reaching out to everyone. I bought a used woods Bh80X backhoe with pto pump and 3pt hitch. I have put it on just to check it out and my daughter and my self have touched up paint and greased it...

Well finally bought a used woods BH80X backhoe actually have had it for about 3wks. it came with a 3pt hitch hook up and a Pto pump which I did want the pto pump my tractor is HST and I wish not to mix oils. And before you all jump me about the 3PT hook up I haven't even dug with it yet and I...

Hi All. I have a BH80X on a Bobcat CT230, today while digging up a stump, I noticed that when I let go of the stick, the boom would keep drifting slowly to the right. It would do this whether I had the tractor running or not and it didn't matter if I had the hydraulics shut off to the hoe. Any...

My father recently purchased a DK40SE with a woods backhoe and I noticed a few things that I haven't noticed with other units 1. The main boom function seems very jerky even with the tractor idled all the way down its extremely touchy. 2. The main boom tends to drift towards the ground, I...

I am looking at buying a backhoe for my L3901. Does anybody have experience with a woods BH80x on a similar sized tractor? I know the BH77 is a good backhoe but I think a hydraulic thumb would be a great time saver over a mechanical. I would appreciate any input from owners or users of either...

Been a long time coming but I finally got a backhoe for our L3540. I chose the Woods BH80x for a few reasons; I wanted a hydraulic thumb, the price and USA made. While I am sure the Kubota BH92 would have been spectacular it is much more expensive and it weights a bunch more. It does look like a...

I've got a new (under a year) Woods BH80x with subframe mount on my NH TC33D. I had it off the tractor for a few months and when I went to hook it up I find that I have almost no hydraulics power on the backhoe. I can get the the tractor's hydraulics, which are working fine for the front end...

anyone know if the woods bh80x hoe will fit on the back of 2014 Mahindra 3016

Hello all! New to the forum, I am seeking a way to get more digging power out of my woods backhoe? I have a L3400hst. I have already up the presure of my tractor to 2700psi but haven't received any more power to the backhoe. Have also tried adjusting the inlet relief valve on the hoe and...

I was using the backhoe to dig out some stumps today. I pushed on a stump with the back of the bucket and the dipper cylinder broke at the cylinder rod end. I have over 400 hours on the backhoe and have easily dugs out over a hundred stumps. The break looks just like the one that westbrooklawn...

I have an opportunity to "upgrade" to 80X on my CK27... the question is: is this backhoe a good match for the tractor? I have seen sluggish performace in hoes not sized properly for the tractor when the required pressure (even with high revs) is too low... the result is typically...

Looking into this BH for my '09 Kubota. My dealer just told me that Woods is no longer offering the sub-frame for the L3400 and is steering me towards the 3-pt, which I don't want. Can anybody give me a part # for the subframe mount so I can look it up? I will try and call Woods tomorrow and...

The larger size R4's. I want them. Tell me that I can use a 3ph finish mower and not rut and muddy the one acre of old farm land that passes for our front lawn. Woods BH80x backhoe. "Looks" huge slung off the back of the B3300. Too much hoe for this tractor? 16" bucket too big for light...

I was digging out a 10" stump with my Woods BH80X (done it a hundred times before), when suddenly BANG!... the cross tube on the cylinder end of the dip stick cylinder had broken off. The weld didn't break, but it actually pulled a plug of metal out of the cross tube. I am thinking I can clean...

A local Kioti dealer went under and they are selling off the leavings,,,,,,,there's a Kioti BH 80X ,,,which is a WOODS, , now I got a hold of a 2006 spec sheet and on that it says I can get a subframe for a 2710 ( didn't make the the 29),, same tractor , different motor. Went to the dealer, and...

At an Idle, I can do a lot. At 1500RPM's this thing has more power than I expected. I was worried that I didn't have the GPM's to run it to it's full potential, but I was wrong. I spent 2 hours getting used to it tonight. In that time, I went from bumbling around to actually controlling it.

Hello, I am in the market for a backhoe for my Kubota L3400DT. I have been looking at the BH80X and the Tomcat 76. Are the any opinions on either for my 3400. Any help would be appreciated. Thanks, Tom

Has anyone installed a Woods BH80X or BH70X on a CT235?

Dealer is offering above for $6600. First backhoe, is this a fair price. Thanks. Scott

I have a woods bh 80x backhoe on my kubota b3030, around a year old. It's got the optional manual thumb. I'm thinking about buying a TLB,at which point it doesn't seem like I'd need 2 backhoes, even though I've been quite pleased with the woods. Question is, is there a used market for...

I've got a Brand new Woods BH80x subframe mounted on a Kioti CK30. As I crowd the boom under load there is some very unnerving creaking (almost a metal popping). This starts happening when the dipper is maybe 4 or so feet away from the boom. I am only running about 1500 rpms. I read and reread...

Is there both a mechanical and a hydraulic thumb available for the Woods BH80X backhow, or just one type? Thanks, Mike

i have a woods bh80x backhoe on the way. the dealer tells me that there is no hydraulic hose kit for my 3710. how do i go about hooking up the hydraulics? also i am going to mount the subframe and backhoe myself, any help with the install would be appreciated. thanks rw

hello tbn! after gathering info. from this site and doing a bit of research i have a bh80x on the way. the dealer tells me that their is no hose kit for the 3710. so i am looking for info. on how to plumb the hydraulics off of my 3710. also i plan on mounting the backhoe with subframe on my...

Went to a dealer today that told me he sells the Woods BH80X and puts them on the L3400 all the time. Other dealers tell me the Woods is big for the L3400 and I would have to go with the Kubota BH75. I really like the Woods backhoe but don't want it if it is too big. Any thoughts on the right fit.