value

I have a 2023 Kioti RX7320PCB Cab with air and heat, 55 hours, plastic still on seat. Front end loader, shuttle shift, 4wd, 800 lb 3 point counter weight, 3rd function, liquid weight in back tires, mint condition, kept inside, I am trying to get a value as I am trying to trade this in for...

Just finished rehabbing my 1986 Yanmar YM169D. It also has a Yanmar YBH670 Backhoe and a Yanmar YFL580 Loader. The injector pump was rebuilt. All fluids flushed and new filters installed. New tires and new urethane paint. Also new seats and LED lights. All gauges work and the tractor runs like...

Ten years ago we took in some horses from a couple that my wife knew from working at the Hospital. He had been in a bad accident and couldn't take care of them anymore. I had no idea what a mistake this was, but it also motivated me to get a lot of things done on the land that I probably never...

I have a BX2680 with 176 hrs. on her. It includes a 60" non drive over deck, 60" Kubota snow/dirt plow blade with quick disconnect, and a land pride 48" grader scraper. Also have a Grammer suspension seat installed. I bought it just for mowing. Then I added the other implements, but don't use...

I've got an as-new LX3310 w/ grapple, etc. in Southern Maryland with 99 hours that I may sell to fund an upgrade. It was purchased new with a BH77 which has been stored separately, mounted 2x, and used ~3 hours for plucking a few bushes and shrubs out on the property. I'm curious on thoughts...

Apologies, I've tried to find the thread I thought I started on looking for a new home, but can't find it. I hate to start something on the same subject... Wife and I are on a 5 year plan to sell our current home and retire in the "house we'll die in". In the thread I was looking for...

Howdy all: I have a co-worker who is looking to sell his 1984 Ford 2910 that comes with a 6' rotary cutter. I don't know if it's allowed here, but can I post some pictures of it, give details, and have you all assist in a ballpark value? If not allowed, let me know and I will delete. Not...

Hi all, I have had a great experience using my MF 241 these past 18 years ... it's now about 24 years old, has 1618 hours on it (an accurate reading). I'm the second owner; 1st owner was a weekend warrior; I am a vegetable farmer but small scale, hence the low hours count. I've had the tractor...

I'm thinking about selling my JD5090E due to getting rid of my livestock. It is a 19 model with 12xx hrs, 4x4, open station, 24x12 trans, 540m loader, oversize tires from deere(don't remember the size). How can I find out what it's worth?

Hello, I'm looking for a value on my B2710. It is a 2002 model with 680 hours. It has the loader, snowblower, landscaping rake, and box-blade scraper attachments. It also has the vinyl-sided cab and hard top with a heater. It is in good condition. Thank you.

What is value of 2007 Kubota L3430HST with loader used, 400 hrs?

Waiting for an inner wheel bearing to arrive for my 15' flexwing mower. I already have the outer assembly. Memory from 40 years ago says: (after all is assembled correctly and greased up) 1. Tighten to an appropriate torque.... 2. BACK the nut off say, 1/2 turn then slide cotter pin through...

I know the asking price is high, but I like the product and its local. What's a fair price, female owner? https://www.facebook.com/marketplace/item/505816462327643/?referralSurface=messenger_lightspeed_banner&referralCode=messenger_banner

My Father (82) is moving from his 4 acre lake lot into a condo in the city. He is dispersing some equipment and I am trying to find a fair value to list his Mitsubishi MT 250D. He also has a LandPride RTA 1258 tiller, & a Agro-Trend Model 1060 snowblower. The tractor doesn't have many hours on...

My brother-in-law is no longer able to cut grass. He has offered it to us at no cost but we want to pay him it's value. They could use the money What I have found it was made 2011 to 2012 and has only 47 hours on it, garage kept. It starts and looks show room condition. What do you folks say...

Purchased a Kubota MX6000 (ROPS) 8/25/2023. Currently has 53 Hours. Added upgraded tires, rear remotes, loader, box blade (woods), brush hog (land pride), hydraulic top link (fit rite). We decided to lease our farm land and just keep our older Allis-Chalmers in rotation for around the house...

A friend wants me to look at a 300 hr. 2011 LS model 3110 28 hp with him. I had not heard of the brand. He has a short driveway to maintain and wants to put in a large garden. Can anyone provide experience or feedback on the brand before I go with him? Thanks, JC

Upon the dirrction of the Estate Lawyer I hired a recommended Real Estate Appraiser to value Moms home. The home is very much 1950’s and the appraisal was very detailed over 43 pages. I offered my siblings the appraised price as-is with no sales costs… in other words a clean deal with a max 30...

Hello, I found a 1980 Yanmar 3110D with a loader and 3 point. I'm trying to figure out what it is worth. Its being sold at a Tractor dealership as a Mechanics special. Apparently the dealership mechanic looked at it and found these problems: minor radiator leak headlights not working (Said...

I'm helping my parents clean out the garage. My father has a CC 127 tractor, along with mower deck (approx 50-55") and rear mount tiller attachment. Not sure the last time it was run, or if it turns over currently. Any idea how much it's worth? Ideally I'm curious for value both running and...