rake

I have this hay rake I am re doing. It has teeth worn out on the hubs that make the rake turn. Can't find replacement parts. Any ideas how to add some kind of clutch to lock the wheels? Thanks

Greetings. not a lot of used attachments in my area, but I found a decent and reasonably priced 6ft rake, wondering if anyone has ever extended/ widened theirs? I can cut/ weld/ & drill/punch holes with no issues. I understand that it would place increased 'leverage' on the main angle iron...

Does anyone have a solution to unhitch a 3-point York Rake without it rolling over when the tine's are reversed ? Folks will say just spin it around. However, must position the rear of the tractor over a steep drop-off and adjust top link to exact spot where rake won't hit rear tires. Spent the...

Good Morning The tines on my landscape rake will not stay up. The tines will rise and hold their position when lifted by the hydraulic cylinder. As soon as i put the control lever in the float position, the tines will automatically lower until they rest on the ground. The tines will not be...

Need to use a Harley Rake to grind up an old driveway. Tractor puts out 9 gpm hydraulic flow. I'm wondering if that's enough to operate a 4'-5' Harley Rake. Most are run by skid steers that have a higher gpm on the hydraulics. Any of you guys have any success running one with your tractor?

Title says it all. Do I go 6ft or 7ft? What are the features of a quality landscape rake? I want to use it to rake rocks to the edge of my orchard and get leaves and sticks into a pile to burn.

Looking at upgrading a old rake. I have used a Kuhn friends have but wondered about others, I see some Enrossi and Bush Hog cheaper that Kuhn. Their wheels are independent. Any thoughts?

Hey All, Can a pine needle rake, the type that connects to the 3 point hitch, be used on grass? Will it chew up the grass? Thanks, Eric

I find myself in need of a landscape rake for my PT1850 for prepping a newly cleared hillside pasture. Power Trac only makes a light duty yard rake. I spoke with service at Power Trac and was told my best bet was to get an extra attachment mounting plate and weld it to the existing landscape...

Hi all...please forgive if my questions are naive as I am still learning the world of farm equipment that i use for my 2 rescue racehorses. As you probably suspect I am not mechanically inclined but have learned a lot over 20 years using my Kubota 7800 and attachments. We recently had to take...

I am looking for a rake attachment for the end of the backhoe on my BX23s. Im not looking for 3 point hitch rake to pull behind but one to use like a claw at the end of the backhoe . I have found a couple but the dimensions for the pins are all over the place . These rakes are about 10 by 24...

This is a real branded York rake, not an offshore knock off, made in the USA, category 1, 3-pt hitch, 3/4" top pin, 7/8" bottom pins, 1" wide teeth, 493lbs. Included: optional SSF adjustable caster wheels. The two original tires still have their molded "vent spews/tire hairs" intact on the...

Does anyone have experience using a landscape rake in a pasture to collect horse manure? I have struggled keeping up with collecting the manure of our horses, who are pastured 24/7, and am considering purchasing a landscape rake with gauge wheel. I figure the rake itself can be used for...

Our winters here in the White Mountains of NH have been getting icier than ever. I started using a front mounted landscape rake top strip ice almost 40 years ago with great success, both commercially and residentially. I now leave this 6' rake set up on my Kubota BX22 for just such occasions...

The kiddos were playing w/ the tractor last week & I went to rake my driveway today & the adjustment bar (don't know the name of it) that hooks to the top of an implement and has all the threads on it so you can loosen or tighten it was out of whack. What does this bar do & how do I find the...

Hi, Trying to restore an area back to natural (Central Oregon High Desert terrain) with as little damage to the ground and nearby vegetation as possible after cutting up a bunch of logs. There are lots of small pieces of bark and small branches that I would like to collect and burn (or haul...

I recommend a tractor rake to collect and remove roots and stones from the ground hello, I should reclaim a land that has been uncultivated for years, I should eradicate the weeds, the invasive vegetation of the small shrubs such as ailantos that have created a grove and free the uncultivated...

I recently bought a SSQA backing plate. They shipped it FedEx. FedEx threw the package on the ground (it was about 150#) and the shipping box it came in was all torn up. The plate had a few scrapes and scratches but it was no big deal to me. Anyhow, I guess someone else's package got the same...

I was wondering if anyone would have any info or manual, for a Vogel & Noot Heublitz belt rake. My father had one and I'd like to resurrect it. I remember using it a little when I was younger and it's been junked for 20 years. Are parts available ? Belts, tines, bushings, etc. Thanks

I am adding a third function to my 2009 Kubota L3400 HST tractor and am looking for advice on what size grapple would be best for my tractor. I would mostly be using it to pick up brush and limbs/logs and move them around. Currently I use my forks and have moved literally tons of stuff but it...

Hey All, I am looking at a rock rake or landscape rake from Vevor. Here is the link: VEVOR Tow Behind Landscape Rake, 60" Tow Dethatcher with 21 Steel Coil Tines, Lawn Dethatcher Rake Attaches to 48" or 60" Toolbars and 3-point Suspension Systems, for Leaves, Pine Needles, and Grass | VEVOR...

What thickness steel would you recommend for a small dozer root rake? This is a 90" Rockland rake going on a Cat D3B (about 15,000lbs).

I just bought an old Hesston 3981 rake, 12 wheel with kicker, from a local lot. It's pretty rough and needs some work, but I only paid 250$ for it. I know its the same rake as a H&S BF12, does anyone know where to find parts for either one? Also, does anyone have much experience with this rake...

Has anyone purchased one of these? https://totalwireframe.com/checkout-2/ I would only have use for one maybe 2 times a year. Just want to rake up some grass for compost willy

Now that EA is out of business, what's the next best substitute for a variety of implements? Right now looking for a landscape rake and a blade that can be manually offset (to side of tractor). Quality is important, price is less important. Is Land Pride the next best thing?

Is a 6ft landscape rake too much for a CS2220? The one I am looking at I think is 220 pounds 3 pt

If you are curious about the builds, check them out here - https://www.youtube.com/channel/UCWVSa5kgbGqcpaZUgesS4JQ

So, I used a friend's Rake, in my mind it sucked and was way too $$$$ I had some old leftover metal and went into cad and did some drawing Put it into sheetcam Generated my G code, added my G92 X0.0 Y0.0... Next?....make sparks... Going to fix brunch and do some more work...mmm? I wonder...

I have a BX23s and want to get a 60” landscape rake. There’s a handful of options I’m looking at and I keep drawing myself to their weights. Is something light associated with cheap? - Landpride LR0560, 113lbs (is this rake too “light” to be durable and get work done?) - Landpride LR1660, 241...

I've been getting overwhelmed with invasives like buckthorn overtaking my fencelines and I've finally taken some action. I fabbed up a 36" wide root rake bucket based on the geometry of my 24" trenching bucket. My goal was to have it work wth my existing hydraulic thumb without any...

. . . To clear some undergrowth? I do not yet have a brush-hog or mower attachment, but I would like to clear out some vines/ferns/stuff in a section that I need to take some trees down and eventually plant stuff on. I do have a small cultivator (currently set up with two tines, but I can...