quick connect

Hello, I have a quick question. (TRACTOR KUBOTA M4060) The other day, after I finished mowing, my rear quick connect started leaking hydraulic fluid fairly fast. In the picture, you can see a stream of fluid coming from the bottom of the quick connect on the right. I figure I need to replace...

There seems to be an extra quick connect on the under side of the tractor Any idea what its purpose is? I cant find any reference to it in the manual

I'm thinking of buying a PTO link for my CX2510. I'm not sure whether to get the SD or compact. If anyone uses one I'd appreciate hearing which you bought and if you're happy with it. I'd be using it for my flail mower at this point. Thanks.

I have a LS XR4145 2017 with a front mount snowblower and I lost one of the sub frame mounting pins that are in the back. They are 1 3/16" x 4 5/8" there are two of them and each one has a hole in the end for a smaller pin and it has a T type Handel on the other end. I have been looking all...

Looking for tool suggestions to get these hydraulic hose fittings off. These are on a skidsteer snowblower. I had these hoses off two years ago because one hose had worn through over the years. Got them off and changed with a socket wrench. Had them off again last year because there was a...

The fittings that supply the backhoe (Woods BH77, dealer installed about 8 years ago), have started to leak a little more than I'm comfortable with. The leak is most noticeable when the backhoe is removed and the supply/return lines are plugged into each other. These hoses and fittings are only...

Got a Frost Bite Log Grapple, came with 2 male 1/2" couplers. Need one female. The threads on the hose are 1/2" FPT, the new coupler is 1/2" NPT about 0.030" difference by my calipers. Anyone know about this?

I'm looking for recommendations for the handle replacement of the bucket quick attach. I replaced one of the original handles with an OEM part but it had a pretty sorry weld job on it and it snapped off. So after taking a look at the other handle I found the weld on it to be cracked so now I've...

JD 4320 year 2007 - was hooking up a Rhino auger that I used last year. Like a dummy, I had the bucket raised to make the Auger hookup easier ( side bracket on bucket / loader ) I kept pushing on the hydraulic connections and was cussing hard. Took s break, searched this forum and found a...

I own a XR3135 and I was wondering what is the best method to adding hydraulic lines to the front of the tractor? I believe this may be called a 3rd function. I obviously have lines that go to the skid steer attachment. I'm looking to get the green and blue lines plus a return to the drain, that...

1962 Case 430 The lift arms are somewhat splayed, and so the ends are just a wee bit wide for hooking up without having to pull them together with a ratchet tie-down and some “easing” with a ball-pein to hook up attachments, which pretty much defeats the whole idea of the Eagle Claw “QUICK”...