new holland tc40da

I will be trying to sell a TC40DA HST for an elderly relative but I don’t know the value of it. The tractor has 1150 hours on it. Issue with starting circuit (will be fixing), tilt steering won’t lock (hope to fix), other issues are one ROPS light is loose and a few chips out of back fender...

I have a TC40DA I am trying to sell for an elderly relative. The tractor will only start by jumping the starter ‘trigger’ wire off of the main starter power. All tractor functions work fine otherwise. I haven’t dug too deep but all the safety switches seem fine. PTO disengaged, in neutral...

Hello, I am new to this forum and hoping there is some helpful information out there that I cant seem to find. I am looking to purchase a used 2004 NH TC40DA. It does not currently have a loader on it. I have found a new uninstalled NH 270TL loader for sale. Does anybody know if this model...

Originally posted in NH looking for more help!!!!! Hey folks I have been having an issue with my engine. When she warms up and the rpms are at 2500+ after a couple on minutes-literally at the 1:16 part in the video all heck breaks loose. Knocking smoking, when I idle her down it stops and...

My starter is getting a little intermittent on me, sometimes just giving me a click so I'm going to try to be proactive and replace it before it fails completely. I came across this on eBay - New Starter New Holland Tractor TC35DA TC40 TC40A TC40D TC40DA TC48DA TC55DA | eBay. Anybody know...

Just bought my first tractor and was checking everything over and I see 2 loose springs under the HST, over the front drive shaft tube. I'm guessing they fell out of the damper plate? Wouldn't this cause some sort of malfunction? Everything seems to be working fine. Anybody come across this before?

I've got some issues with my new to me 2006 or 2007 New Holland TC40 DA that I could use some help with. First, neither the blinkers or hazard flashers work. I found the control module with the help of Messick's parts diagram but is this a dealer only part or could I get it cross referenced...

Wanted to share my fix with my no start no engine turn over The white wire furthest to the right on the back of the ignition plug in that goes to the small pink wire on the starter solenoid Somewhere between the two ends it was dropping voltage and not enough to make the stsrter turn the...

Hello folks although I have been a member for a little while this is my first post here! Here is my problem, there is a squealing noise on/off coming from under the hood while its running, I thinks it the alternator, so is it possible and would someone already have the part number/vendor for...

Well guys im pretty new to the forum. More of a lurker with a few questions from time to time. Got it in me a few months ago to build a grapple, or should I say procure the components and have a welder do the assembly. I was fortunate enough to come across a set of grapple arms laying in...

My New Holland TC40DA starts fine until you work it hard and the temp gauge is about 3/4 to the hot side and then the starter wont turn over just makes a single click until motor cools down and then it starts. Does the starter have thermal overloads?

what size and brand backhoe do you have on your tc40da New Holland tractor?

Just bought a used NH TC40 DA I have some questions Where is the dipstick for the HYDRO, I found the dipsticks for the Engine oil, hydraulic oil in the back, the pwr steering, and front diff. Is there a dipstick or sight level for the Hydrostatice drive? I dont have an owners manual so i am...

Hello, I have found a like new 2006 TC40DA with 229 hrs. with 16a loader and canopy with a 6ft woods bush cutter for 17000. It is a 1 owner and would like to know if this is a good price or not. he said he bought it new and paid 25000 for it.also he had rear hydraulics installed.very nice...

MODs, please delete this port. I have moved my question into the pricing forum. Thanks.

A fine, local New Holland dealer has a new TC40DA tractor with a matching 72" loader. I'm paying cash, I have no trade. What would be an exceptional yet realistic price for this machine?

Hi all, I have whittled down my tractor selection to a couple and was hoping you folks could help me out. I live on 25 acres in NC at the end of a 1 mile dirt road - my part of the road is the last quarter mile which I need to maintain. I will be bush hogging about 20 acres of the land (I...

Well it's soon going to be time for my 200 hour service on our TC40. I'm interested in any tips on this process that any of you might have because this will be my first time doing this (my dealer did the first service as part of the purchase package). I'd be interested in any advice you'd have...

I have been holding out on everyone...I have had my new tractor now for a couple months, a TC40DA 16LA frontend loader and gearmore box scraper. I moved to a bigger property and just had to get a bigger tractor to go with it. I still have the TC26 DA and decided to try to sell it on my own...

Thanks for the advice and opinions as we researched for buying "Our" first tractor. I turned to this website more than any other for information. "We" ended up with New Holland TC40DA, 16 LA loader, grill guard, had rear tires loaded, added rear work light, Bush Hog Squealer SQ720. We tested...

I am in the market for a new tractor. I am thinking about stepping up from the TC33D that I had previously. I have about 80 acres with the majority of it in WIP and classified forest therefore I will only be bush hogging less than 10 acres total. Will need to do food plots with disc and tiller...

Well guys, I've had my new tractor for a little over a year now and I've made two mistakes that I'd like to pass along so maybe I can prevent them from happening to another member. The first one was finding out that the rear of the front bucket probably should be a bit higher or a guard should...

I have a chance to buy a used TC40DA, 100 hours, garaged, 17 LA FEL, brush guard, very clean. One year left on warranty. Owner no longer needs it. Owner is neighbor and takes very good care of machine (he takes good care of all his tools). I am very new to all of this and would like a method to...

Does anyone have any information on the New Hollands having neutral switch problems? My new tractor of just a few months let me down today, it would not start. After checking all of the normal things, parking brake, in neutral, weight / body on seat, no sound, no cranking and of course no...

First let me say Thank You to all posters of TBN! This site is great. Next let me say that I grew up on a small farm and have been using tractors all my life. I decided on the Tc35 to 45 models. Started getting prices from local dealers, then using these resources started final dickering. Now...

I checked on the photo page an found someone ( db2 ) posted some pictures of a cab on a new holland TC40DA. My question is can somebody tell positivly what mfg makes this cab? I've checked both curtis and sims as they seem to be the most popular, and none of there pics look like this one. I'm...

buynh-ML-746686-ML- Brand specific thread, NH, posted in General Forum.

I am strongly considering a new NH TC40DA with 16LA loader and either a Bradco 509 or 408 back hoe for general purpose clearing, trenching, etc.. I am interested in hearing any pros or cons with this tractor and setup, please.

I ordered a TC40DA today & I've read on here that each brand has its own minor problems. To those of you with tc's from a new owner (arrives next week), what quirks do i need to keep an eye out for? I guess of what I've read, the battery leak seems to make me shudder tha most.

As you can see in the attachment, I got the tractor back, this time with the backhoe. Still don't have the right joystick or weights. So they are going to come and haul it away again. Dark and cool here in central Indiana. We had almost 3" of rain yesterday, so don't know if I'll get to dig...

Well, I'd like to thank everyone at TBN for their advice. Last Saturday I picked up my new TC40DA, and as promised, I have pictures available here: Tractor Photos Again, I thank all of you who offered advice and suggestions. I feel I got the right machine for the right price.

We're going to buy a tractor in a few months. The New Holland TC40DA is definitely in the budget, but I really like the John Deere 4120 (eHydro). The John Deere advantage is that it has a 43HP turbo diesel made by John Deere and the New Holland has the Yanmar 40HP (non-turbo). John Deere has...

Another new guy here. I found this site a short time ago and am totally thrilled with it. I have been luking a bit, learning my way around, and finally decided to become a member. I currently have a couple older tractors (Fords-54' NAA and 62' 2000) and am in the market for a new tractor. My...

Hello - we have been searching for a tractor and started with the TC40D NH, 4610 eHydro Deere, and a Kubota. We are John Deere people, but the fuel fill in the hood, and cheesy hood design pretty much turned us off from the 4610 along with the higher price. Didn't like the pedal layout of the...

Ok, folks, let's try not to start a brand war...:-) I am about to purchase either a TC40DA or a John Deere 4610. I already own a TC29D with Supersteer a FEL and approx. 550 hours on it. It's been a good machine, but to small to move round bales so I need to get a larger chassis machine with...

After about 5 months of intense mental anguish I made the decision to trade my 2 year old TC40D with SuperSteer for the new TC40DA, again with Supersteer. Last fall I had posted here a couple of times that my next tractor would not have supersteer but I was worried that I would not be satisfied...