new holland 1725

I had oil spewing from this port the instant I started up my tractor. I'd been snowblowing on fresh snow the day before, so I know I hadn't dripped so much as a drop yesterday. The manual says it's the "main gallery access port" and nothing else about it. I looked in the engine parts manual and...

Was talking to my brother this morning and he has a problem with his 1725. PTO shaft quit spinning and opened it up to find this. Bearing spun and cracked the housing. He put it back together and is going to use for pulling only until he can figure something out. He has about 4000 hours on the...

My neighbor has a '97 New Holland 1725, 2wd that he wants to sell (he is moving). I have no idea what the tractor is worth. It has 900hrs and is in fairly good shape with service done every fall. Any help would be appreciated. Thanks, Rob

Hey guys. I set my 1725 up for plowing after this storm, but couldnt get it started. So it sat for three days in sub-zero wind chills. Spent three hours getting it started, but when i did the loader and 3PH have no power. There is no sound or feel to the system and its been idling now for over...

Hello, I am new to this forum so hopefully this is the right spot to post it. I just bought a New Holland 1725 tractor with front industrial & rear turf tires. I found front 7 x 14 AG rims and tires, but I need the rear 11.2 x 24 ones. I can trade my rear rims with the 13.6 x 16 turf tires for...

Recently bought a 1725 with "supposedly" 640h on it. I know almost nothing about diesels or tractors (doubly about a diesel tractor) and my mechanical skill i slightly above "Oil Change" level. Thought this would be a good learning experience - not been disappointed. Bought her in early Sept...

hello first time post 1st gear in range selector runs normal thru all 3 speeds 2nd gear only moves slow in 1st and second speed but rpms are way up 3rd gear moves slow in 1st speed and doesnt move in 2nd or 3rd rpms also way up to get it to move this has a 9x3 gear transmission i changed hyd...

We have an overheating 1725 tractor with only 1700 hours. The radiator is leak and plug free, the thermostat is fine, and the pump seems to be fine (although I haven't pulled off the engine). Could it be an issue with the drain petcock? Is there some other point in the system prone to...

How many lbs of torque for head bolts?

Hi, What kind of oil should I put in my New Holland 1725, what oil filter and air filter do i buy. Thank you so much. Tanya Somers, MT

I have a 1996 New Holland 1725, 4x4, approximately 1500 hours. I have had an intermittent problem with my glow plugs. Then, the glow plug indicator light would not light, and all I can do is crank it for a while until it starts without preheating. I pulled the glow plugs, grounded the body to...

I just bought a New Holland 1725 (1999) with backhoe and loader. It is the first tractor I have owned and I hope I haven't made a mistake. It has 478 hrs (supposedly) and seems in good shape. Is there any advice or warnings out there about this model? Does anyone know why they only made them...

I have owned the tractor for 9 years. (bought new) recently the key switch failed and I replaced it. At the same time starting was a problem. The glow plug light comes on. The tractor takes much cranking and produces blue grey smoke but no start until it has been cranked for some time. Runs...

I've gone through a couple of fuel shut off cables now, they all tend to break in the winter, they are stranded cables and I wonder if anyone has a permanent replacement or fix for the fraying cable. I thought of soldering the strands in the pull knob end, where they wear and break. The cables...

This is a repeat of a question I asked a month or so ago. I got great help from several of you. Ductape said (paraphrasing) -----remove the power-beyond hose, run a new hose from the power-beyond port at the front loader valve to the "in" side of the new hoe, then a hose from the "out" side of...

I have a Woods BH70 backhoe on order (4 wks out) and need to get set up for attachment to tractor hydraulics. My loader uses the accessory ports on the OEM "diverter/manifold" leaving no obvious access. Would there be a power-beyond port on the loader control valve set? I have tractor Svc...

hey all.working on a friend's 1725,found water in diesel by draining into a clear glass jar.drained all the fuel from tank,put in fresh diesel & managed to get it running good for a while then back to barely running (no throttle response).tried bleeding at injector pump,appears to be good...

I am trying to do some preventative maintainence on my tractor but all of a sudden I cant open the hood. The latch moves back and forth but won't release the hood. Is there anyone with the same tractor that can open the hood and post a picture of the assembly, so I have a clue as to how to...

I am looking to sell my 1998 New Holland 1725 2/w drive. It has 551 hrs on it. I want to find out what a good price would be. I am the original owner, it has been kept in a shed and it is in great condition. There is also a rear mounted 60" Landpride PTO driven finish mower and a 48" Bush Hog...

I've been reading for a while, I have 11 acres of old peach orchard and a house to landscape. Mostly will cut the field dig up rocks and push up dead trees. Also have lots of rocks to move about, some take up half a bucket. Will the 1725 do the job for me? What about the price? 1997 NH 1725...

So many to choose from:) I am looking at purchasing a new holland and need advice on the pros/cons btwn models. I have a couple acres to mow about 5 to brush hog and am looking to move some 4-6 ft pine trees around. I may need to till a small garden also. Are these tractors big enough for the...

I bought a 1998 NH 1725 today. It is my 1st tractor ! 248 hrs w/ turf tires...Looks new , Oil is Black ! Is there anything I need to know? Tips, problems , etc... Dan

I've been wrestling with the decision to buy a 3PT splitter for my New Holland 1725, 1998 model year I believe, 4WD, manual 9 X 3 transmission with no rear hydraulics. I recently used a splitter on a mid 1980's Ford 1720 (with no PTO pump) and I was satisfied with the ram speed. ASSuming my...

I'm looking at a '97 1725 4WD w/7308 FEL. The tractor is very clean - has 155 hours. Hardly used. Maintenance was done by the local NH dealer. He's asking $13,000. Is this price about right? Are there any problems with these tractors I should look out for? Thanks in advance for any help.

I am looking at a NH 1725. It is a 98 model 2wd with 234 hrs on it. Any opinions on this model tractor? Is it a good reliable tractor or a piece a junk? Any known problems? I hear it is the same as a TC29. I guess parts are still available? Thanks for any info.