massey ferguson gc2410

  1. T

    MF GC2410TLB

    Does anyone know if a mowing deck on a MF GC1710 will fit on the MF GC2410TLB?
  2. MF RED in MT

    Massey Ferguson GC2410 with CB05 Backhoe and boom cylinder "hydraulic hose leaking"

    After reinstalling my backhoe last week, I discovered a hydraulic fluid leak from the boom cylinder hose that makes it's connection closes to the tractor. The hose has a pinhole leak near the upper boom where the hose makes a 180 degree turn. This hose has been rubbing near the squared off...
  3. MF RED in MT

    What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY

    Hey, since we mostly stick around here and post, I thought I would start a new thread (like others have done for different color tractors) for us to post about what we have done with our GC Tractors TODAY, or what we have done to our GC Tractors TODAY! Or maybe it's just a weather report at...
  4. thecnwcaboose

    3-Point Hitch  GC2410TLB 3 Pt hitch goes up, stays up, and blows seals

    My MF GC2410 3 point arms go up, stay up, and I cannot get them to go down. They over pressure the system, and hydro oil blows out the seal for the 3pt actuator valve under the rear fender cowling ALL OVER. I replaced the pin which actuates the spool inside the cover where the handle links to...
  5. Toddao

    Tires  Looking for new rear tires ...GC2410tlb

    Looking at these rear tires, the weight rating looks like they are heavy enough to, just haven't seen any pics of a scut with type for rear tire ?. Thanks Sent from my iPad using TractorByNet
  6. H

    Massey Ferguson gc2410 block heater questions

    I bought the Massey Ferguson block heater kit and opened the box, read the instructions, looked at the plug they want you to punch out. Am I crazy or does the block heater look significantly smaller than the plug? I know a lot of you guys have installed them but I dont want to have an issue...
  7. C

    3-Point Hitch  Massey Ferguson gc2410 3 point not working

    3 point not working now, I was out plowing snow using a front blade & a 3 point rear blade, worked ok, parked it, jumped on it the next day & the 3 point will not lift, took off the rear blade & still nothing. I did find a loose hydraulic hose at the top of the rearend were the backhoe hose...
  8. M

    Price Check  massey ferguson gc2410

    what would a good price on a 2010 massey ferguson gc2410 with 320 hours? in good shape a few scratches but overall a really good tractor.
  9. P

    Massey Ferguson GC2410 / GC1710 TLB Owners

    I am looking for reviews from owners of the GC2410 and the newer GC1710 series SCUT's and want to know how it has served you as far as service needs since you bought it. If you don't have a backhoe unit that is fine, still looking for info on the base unit. Tell what you like, don't like...
  10. O

    MASSEY FERGUSON GC2410 HYDRAULIC CYLINDERS LEAK DOWN

    MY GC2410 HAS AN HYDRAULIC LEAK DOWN ON ALL HYDRAULIC CYLINDERS, FEL & BH, EVEN WHEN RUNNING I HAVE TO HIT THE JOYSTICK TO ROLL THE FRONT BUCKET UP TO KEEP THE LOAD FROM PULLING IT DOWN, I HAVE NO EXTERNAL LEAKS OF ANY KIND. IS THIS NORMAL FOR ALL THE CYLINDERS TO LEAK THAT WAY ? WHEN SHUT OFF...
  11. H

    GC2410TLB 3 point linkage kit

    Okay, now I'm posting this in the right forum ( sorry Mahindra folks ). I have a GC2410TLB that I bought new in 2011. The dealer was asking a pretty heafty price tag for the 3 point linkage kit at the time and I opted not to get it as I didn't have any rear implements anyways. Well.. a few...
  12. H

    3-Point Hitch  GC2410TLB 3 point linkage kit

    Hi there folks, I have a GC2410TLB that I bought new in 2011. The dealer was asking a pretty heafty price tag for the 3 point linkage kit at the time and I opted not to get it as I didn't have any rear implements anyways. Well.. a few years later and I'm now kicking myself. I'm trying to...
  13. P

    Backhoe  Hose connection on gc2410tlb

    Does anyone know if the blue and yellow hoses get connected and the red hose capped on a massey glc2410tlb. ? Mmm will not raise and I think this is the problem. Thanks
  14. 3

    Loader  GC2410TLB FEL Joystick - Swap Up and Down Control???

    Hi, New owner of a 2008 GC2410. Probably a dumb question but this bugs me enough that I have to ask it anyway. I know it's all how you look at it, buuttt is there any way to swap the loader controls so when I move the joystick up the bucket goes up? Any thoughts? It has to be harder than just...
  15. C

    GC2410tlb throttle cable frozen

    Purchased GC2410tlb new in November. It was stored outside (like at the dealership) for a couple weeks and since has stayed inside unheated garage. Only use has been in moving a couple buckets of wood every week or so, otherwise it grazes in the garage. Snowblowing I do with my JD 316 for...
  16. J

    GC2410TLB rear hydraulics

    I'm thinking of adding a post hole auger with hydraulic downforce kit to my tractor using the hydraulic lines that are already there for the backhoe. I'd appreciate input on what I'll need for components and how to hook it up.
  17. R

    GC2410TLB Fuel Guage

    Have about 75 hours on my tractor, noticed the fuel guage is acting up. Sometimes it right on then it says empty. Any ideas? any other have this problem, getting ready to call dealer. Thanks Ray......
  18. R

    GC2410TLB 1 year review

    I have had my tractor for about a year so i thought I would post my review. First of all, great tractor . Does everything that I have needed it to do. Wonder how I used to live with out it. First tractor I have ever owned, just like anything the more you use it the better you get. Have about 75...
  19. B

    GC2410tlb or gc2610tlb

    After much research and using a kubota for a week, I think I have settled on the MF GC series tlb. Is there any real performance difference between the GC2410tlb and the GC2610tlb. Local dealer has a 2410 for 16,800 now and will have more of both in August. I'm not in a hurry to buy right...
  20. C

    GC2410tlb rpm and hour gauge

    Just got my new tractor the hour gauge was at 1.1 when it arrives and the hour gauge stop working at 1.7 The rpm gauge will not move either. Anyone seen this before?
  21. T

    GC2410TLB Arrives today!

    Todays the day I turn from Orange to Red. :thumbsup: The 'ol BX1800 has served me well and is going to a good home of a friend of mine. Half of the Hours I put on it were doing stuff for him anyway! I didn't make the decision lightly but info on this forum was a big help in choosing between...
  22. H

    Massey Pricing on MF GC2410TLB Cash v. Finance

    A week and a half ago, I took my wife to the local Massey dealer where she test drove a 2410TLB. Nice machine, I drove it too, and we are considering if it may be good for our little ranch. Anyway, the dealer quoted a cash price of $17,100 for the TLB, but a financed price of over $19,000 if we...
  23. D

    Differences between GC2410TLB and GC2610TLB?

    Other than the gross and PTO horsepower differences, I don't see any other differences in the spec sheet. . . . Looks like they have the same engine, and only achieve the additional horses through revving the engine from 2,600 to 3,000 rpm. So part for part, they're essentially the same...
  24. R

    GC2410tlb front bucket drop

    After moving alot of dirt with the front bucket, it started to do a slow drop. Called dealer came out and replaced one of the front bucket hyd arms. Also one of the rear outrigger arms started to do a slight knock . Usually after using back hoe but also does it when tractor is off and arms are...
  25. R

    Gc2410tlb mmm raise and lower

    Have a gc2410tlb with a 54" mmm. Having trouble raising and lowering mower deck with hyd lever, can raise and lower with only mower deck height black knob. All hyd lines connected. Won't raise or lower with bagger system on or back hoe. Thanks Ray
Top