kubota l3650

I have a L3650 that has hydraulic remotes but I dont know what type or size fits them. They are factory that has been on there since I bought the tractor used years ago. Want to put a hydraulic top link I received for Christmas on. What style fits them.

1993 Kubota L3650 4wd with the mechanical shuttle shift. The tractor has 800 hrs on it and works great. The only issue I’m having is the clutch doesn’t seem to want to fully disengage. When I push the pedal in, the tractor stops, but there still seems to be tension pushing the tractor forward...

I have I think a 1992 Kubota l3650 The three point operates normal all the front end loader controls work normal Except the curl it is extremely slow if you rev the tractor it goes alittle faster but not much I switched the dump and the curl hydraulic lines and that did make the curl operate...

Hello, I am in the market for a larger tractor (currently have a 2016 BX 2370). I have been looking at new tractors but I ran across an older Kubota and thought I might give it a look. I would appreciate any opinions on the price as well as anyone's experiences with this machine. 1993 Kubota...

So.....I am considering the purchase of this tractor....one owner....he has agreed to have the local Kubota Service manger conduct a buyers diagnostic test. A few things not working...FEL sloppy joystick, PTO will not disengage....other then that nothing else disclosed. I need enough HP to...

Is there a video on how to change the upper pivot seal on my L3650 Kubota?

My L3650 DT GST is having problems now on a continuous basis with the forward reverse lever shifting. From what I learned it looks like I might need to split the tractor. But I also found out I might be able to gain access by removing the transmission side plate. I have already ruled out the...

Located an older model kubota L3650, FEL, shuttle shift, 17 actual hours, $15,000 Any ideas if this is a good price? Thanks,

I've been dealing with a TON of confusion regarding tractor/skid loader/post driver hydraulics, and I think I've come to a consensus but want to make sure. My L3650 has three hoses that go to the loader - essentially a power out port, a "power beyond" that goes to the 3 point hitch and then back...

Hi. I am looking for a current model tractor that is like the old model L3650 GST that I had awhile ago. I really liked that tractor and was wondering if Kubota made anything similar today? I don't want a loader or four wheel drive, and NOT a hst tranny. Only need to pull a hay rake and...

A friend has a L3650 and the clutch seems to be slipping from his description. It has 1200 hrs and the clutch has never been touched. He said that he checked the WSM and it had all of the parts, etc. but no specific instructions on how to adjust the clutch. Does anyone have a diagram or method...

Power steering on my L3650GST starts to fade (harder and harder to steer) after running for 2 to 3 hours. Just noticed this happening this weekend. The loader wasn't attached but the 3pt hydraulics and the GST seem to work OK. This happened two days in a row. First thing in the morning the...

Dad has a Kubota L3650 with a Laurin cab that he has for sale (as seen in the ads section). It is too big for what he wants to do (working in the woods) and he is worried about the cab making it top heavy on the hills that we have down there. Anyhow, someone has offered him a nice looking Kioti...

Dad has a Kubota L3650 with a Laurin cab that he has for sale (as seen in the ads section). It is too big for what he wants to do (working in the woods) and he is worried about the cab making it top heavy. Anyhow, someone has offered him a nice looking Kioti LK3054 with a loader and R4s in trade...

Hi, I am reletivly new as a member but have searched posts here before. I have an L3650 (40hp, 4wd) with GST transmission. In shifting from forward to reverse I am having issues where it will not go forward unless I firmly shift ( snap it in). I found one adjustment in the linkage below the...

Thought I would share my recent experience with glow plugs in L3650GST. On Tuesday the temperature was about 12F and wanted to do a little work with tractor. Gave glow plugs about 30 seconds before starting tractor. Tractor started OK but was a little rough for about 10 to 15 seconds then it...

After using my L3650 for about 4 years, I found the original 3pt hitch left/right stabilizers to much work. Original equipment for this tractor are turn buckles that need to be adjusted for the attachment being used. That was a pain. When nothing is attached to 3pt the lower arms had to be...

I have a vintage 1991 L3650 which I recently started and 2 of the 3 warning lights (clogged air filter and not charging) not only came at start, but stayed on. This has not happened before. I cleaned the air filter, which needed attention but which was not clobbered and inspected the fan belt...

Winters on its way. Just loaded the blower today and chains. Last winter was tough at the beginning. Deep cold, wind and lots of snow. Snow suits worked well for the cold but tough to beat that wind and snow. I would like to do a canvas soft cab. I have not found anything on the market so will...

just purchased a NH 450 sickle bar mower and not having used one before I am having trouble hooking it up to my Kubota 40hp tractor. I can't seem to get the u shaped piece past the lift arm up rights so to attach it to the tractor. Do I need to adjust them in closer to the tractor to get more...

My L3650GST stalled out and now will not start. It has been getting harder and harder to start. We have cracked the fuel lines and have diesel at all four injectors. With a fresh battery, the engine will fire and almost start but just won't quite make it. When we tried to remove the glow...

Well I finally got my acreage and the L3650. It is a high hourer but seems to be in great shape. I've spent about 4 hours mowing so far and have really enjoyed working with the tractor. The big turf tires seem really good. Anyway as I was driving home from the dealer the tractor was showing...

Hi all Finally got my L3650 - it is older but looks in great shape. So far I'm pretty happy although I need to track down a FEL for it. Our dealer is looking but I have not heard from them yet - they thought they could track down a new atlas FEL. I've done a few internet searches and have...

Does anyone know the inside wheel base for the front and wheels of the L3650 - we are trying to ship one on a car carrier and need to know the dimension. Thanks Garth

I am waiting for the delivery of used L3650. I need to start thinking about attachments - FEL, finishing mower, PHD, rotto-tiller. Any recommendations? I am hoping for self-leveling FEL with a quick release feature. The mower, PHD and rototiller I do not have much personal knowledge. Garth

The valve above the clear fuel filter bowl has 3 positions, two on and one off. Fuel flows from none of them. Overnight, enough fuel will seep into the bowl to refill it. You can watch the fuel level in the bowl go down while the tractor runs a few seconds and then stops. Fuel gage read about...

L3650 is overheating both at idle and when working. Temp indicator goes about 7/8 way to red. I replaced the thermostat and fan belt. Radiator fins are clean outside. Inside some (30%) thin white scale. All tubes open. No leaks from water pump, but there seems to be no flow from the engine into...

I just purchased a 1993 Kubota L3650 ,GST,4WD with a LA650 loader, it has 640 hrs on it. I have noticed when I am descending a grade I can hear a rattle type sound. It sounds like it coming under the cover plate housing the transmission. It seems to be when you let off on the throttle while...

OK, guys. Here's another attempt at getting a 'deal' on a tractor with grading/loading capability for 22 acres in California. This one's a used 1993 Kubota L3650 w/2000 light-duty hrs, some rust and dents (don't matter to me), said to be in good working condition. Kubota heavy duty loader...

I have an L3650GST with a LA650 Loader and 4300hrs showing on the meter. It seems the clutch has given out of it, as there was some loud clatter in the case, then it quit driving. Can barely get it to crawl on level ground in low transfer, 1st gear. Any throttle to it and engine just revs...

Not being fimiliar with shuttle transmissions I was wondering if I could get some info. On the tractor that I am looking to purchase, after selecting a gear, when you try to select fwd or rev on the shuttle the gears grind if you try to move the lever slowly. To engage the shutle you must...

I am looking at a L3650 with shuttle transmission that is for sale for $11,500 with FEL. The owner says that it is a 1994 model with a 45hp engine with 700hrs. I have been trying to find the specs on this tractor and I am confused as there is conflicting information. Some sites say that the...

Does anybody have a L3650GST. I have purchased one today and will be picking it up on Saturday. I want to know about any pecularities to this model. I don't know what year it is. It has 490 hrs on it.