john deere x495

Yanmar Diesel 153 hours Brand new 48 Deck

I am working on a 2002 X495 with Yanmar 3TNE74C engine where temp gauge is erratic. I have service manual for X749 and its shows temp sensor resistance should be 40 - 700 ohms. I looked at Deere parts and both models show using Temp sensor P/n T110736 so am I correct to presume the ohms should...

Just joined. Owned the X495 for 15 years. Few things started to go wrong so hoping this forum will fill knowledge gaps when I need help.

Need to replace the clutch plates for the PTO on my X495. Any one have any hints, tips, tricks to make the job easier ???

Anybody try this ??? Front end loaders for John Deere tractors | Little Buck Loader I need a small / light duty loader at a reasonable price for some jobs. The max width I can use is 48" so I am kind off limited. John Deere dealer said they discontinued the 45 series loader (and that was more...

Looking for consumables for a John Deere x485 L&G tractor. Filters mainly. If you sold your L&G tractor and still have items for it LMK Title is WRONG! I meant x485, NOT x495. I could not figure out how to edit the title.

Hi everybody, after lurking around here for a Long time thinking about upsizing from my Deere X495 to a Deere 2520 or Kubota B2630, I have finaly decided to Keep the X495 as mowing will be 90% of everything I will ever have to do. Many nice and knowledgeble People on TBN told me that it will be...

Posting this question for two reasons: 1) Hopes to get answer to the unusual problem; and, 2) Hope the answer will help someone else in the future. I'm in the process of rebuilding a previously badly abused John Deere x495 that I just acquired. It had obviously overheated before I acquired it...

Can anyone help out there I was wondering if the rear pto on my x495 will fit into an x595 that I'm looking at buying but doesn't have one. And if it's just a unbolt and seal job? Thanks

Hi First post and I need some advice. I am surrounded by neighbours with way more tractor experience than I. When I ask for advice I get the same answer from both the green and the orange supporters. Basically stay away from the other one. I trust and respect all their knowledge so that's why I...

Hi all. Just joined this forum, so my apologies if I'm doing this wrong or if this has been covered ad nauseum before... I have the opportunity to buy an '04 JD X495, 2wd, 62" deck w/ 1167hrs. Runs like a top. Transmission is smooth. No leaks. Minor cosmetic issues. Alternator charges at...

Hi group, I am looking for a good used lawn tractor for my Hobby farm/Hunting Land. I have found many JD lawn tractors available and the x485/X495 look like the size unit that would work for me. My farm is 150 miles away and the tractor will be used for mowing the lawn but also keeping my...

hello i have deere x495 was cutting and all trans fluid started pumping out.found 1 of the cooler lines came off thought it was going to be easy fix.losend clamp reinstalled line and refilled trans.started and all seemed fine took for a little ride and saw fluid pumping out again and same line...

Hi all I was trying to get my rear lights working on my x495 and had purchased a service manual some time ago . unfortunatley when i was looking at the schematics ,some of it is right but there is a lot wrong as well . I am sure mine is an export model due to where i live but its hard to belive...

need a john deere x495 cylinder head used if possible, can anyone help, 3tne74 yanmar

Need a John Deere x495 cylinder head 3tne74 yanmar cylinder head need one soon can anyone help

Hi all Ive looked up and down for this service reset button on my x495 , I read through the owners manual and the maintenance manual but im still having trouble . most people say its a button inside the panel to left of the dash but i cant find it . Can anyone give me a gPS coordinate for it...

Hi, I am thinking of adapting a cheap aftermarket 3-point hitch to my 2003 X495: Dema Set Drei-Punkt-Aufh舅gung KAT1 mit verstellbarem Oberlenker + Ackerschiene As I am working in a company with a steel and sheet metal shop, I could have the rockshaft manufactured here. Does anybode...

Hi everyone, i just bought my first GT and settled on a used 2003 X495 with a 62c deck and 1200 hours on it. Today i removed the deck for the first time in order to install gator blades. unfortunately the blades were too long and did not fit correctly, but that is not the issue. I took the time...

John Deere All Wheel Steering reliability? I'm looking for a JD X495, and I'm torn between the All Wheel Steering model and the traditional front steering model. Is the AWS reliable? I'm sure some of you must have a lot of hours on them by now! :) Is it durable for some reasonable...

I have seen where some guys mount a ball hitch on a 3pt hitch. Anyone have advise on where to get one of these? I have a 24ft boat I have to squeeze into a tight space and moving it with the tractor will be much easier than with my truck.

Interested in your thoughts/opinions: - I recently purchased at the "right" price s/h a X748 3cyl Yanmar diesel 4x4 62" cutting deck @ 693hrs in great condition & runs so sweet I reckon it will outlast me. As luck would have it, now in lieu of cash payment/exhange for some earthmoving work for...

Hi Guys Got a glow plug problem I hope someone might be able to help me with. My X495 mower has been very hard to start the last couple times I have used it and pumps out white smoke when attemping to start it. I have read on the net where these 3 cyl Yanmar engines rely on the glow plug...

Won two JD tractors this week on an online auction for less than $2k. I have to pick them up. No idea how many hours and if they even run. The X495 is a 2004 and the X740 is a 2009 and both were used by the Air Force for mowing on a base. They look to be all there except the 740 has a broken...

I have ax495 with a62c.the deck is warped so Iwent to jd and found I can get a 60d iron man or 60 rear discharge iron man.the x495 was built from 2002 to 2005.The two decks I am talking about fit the 700 seires tractor mowers .Iam going to buy one or the other,not sure yet.

Hi all , first time poster and newly joined all the way from Ireland . I have purchased a 2004 x495 with a 54" deck and a hydraulic clam MCS . It needs some work but its not too bad but at the same time i purchased a 2635a without an engine and mowers as it has had a good seat and a few other...

Ran out of fuel last week (did not know fuel gauge was not operating) and replaced with clean fresh fule. Changed the fuel filter twice. Now our JD X495 diesel starts in a snap and runs great under load conditions for 15 to 25 minutes and then starts to run very rough, white smoke, imitating a...

What is the PTO HP of x495?

Hi everyone, new to the forum and have a question. I have a X485 that I purchased recently and need new tires. I really like the Carlise Field Trax HD tires. I can get 26x12-12 for the rear, but I can't find a 16x8.50-8 size for the front. There is a 16x8.50-10 size available, which could work...

can I use JD plus synthetic 0w40 in my x495 with a yanmar diesel if not what should I use

I'm wanting to get my mowing done quicker. Mowing 3 acres now with '97 JD 325, 48" deck. The 325 replaces '98 GT275 with worn transaxle. Had a great engine, though. That 17HP FC590V with about 1200 hours now powers my 325. This unit has the same transaxle but is much quicker, especially in...

Hi All, My John Deere X495 just had it's crank shaft break into 3 pieces!! Not a happy day!!... Engine is a Yanmar 3TNE74 So... I need a crankshaft.. so if anyone has one laying around... or knows of where to get one pleaselet me know at seth@lightingconcepts.org Thanks & Have a great...

I have a x495 had in the past a 318 with a snowblade was wondering what is the difference in the blades from the 318 to the one for the x495 I can find the 318 blades everywhere but nothing for my tractor, I dont want to spend 1300 for a new blade if a 318 will work, what is the difference and I...

Guys, I have found an inch long crack in my transaxle, which has apparently been slowly leaking oil, but today turned into a gush. I've also noticed an intermittent problem with the diff locking itself spontaneously, coupled with the odd loud click. I can't tell whether the crack is a...

Could I get someone to measure the overall length of their PTO shaft that goes from the rear axle to the front. Any 2wd X series will do. I'm putting on a snowblower and looking for shaft options. Thanks Tim X475, X485, X720, X724, X740, X744

Does anybody know if the 60" deck that was used on 425-455's work on an X495. I've got the 62c and do not like it as well as the 60". It doesn't discharge heavy grass near as well. Thanks for any replies.

Hi Guys, I do a fair bit of loader work on my 495, and whilst I'm not looking to be able to lift any more weight, I would like to operate faster. Even raising and lowering and tipping an empty bucket is tediously slow. Is there a fix for this? Thanks. James.

Hello everyone, I have a 2005 JD X495 Garden Tractor with a JD62c mowing deck that has been working great. All of a sudden mowing the other day, I attempted to lower my deck and nothing but the screeching noise that the lever gives when you press it forward to raise the deck and turn the knob...

My dealer believes he has an X495, a couple years old and about 100 hours coming in on a trade. If in excellent shape, what would it be worth with a 54 inch mower on it? If this doesn't workout, I think I am going to go with the X740.

Whats the going price at a Deere Dealer for a brand new AWS? What's the best deck for the buck?

I have a JD X495 and I was wondering if you could give me some suggestions on how often you adjust the deck to prevent scalping. I usually cut at a steady pace with no rushing around turns which I know can scalp the grass. In general I use the machine to mow once a week around the house which...

Hello all. I am new to the forum and am having a problem with our mower. It is a 2005 John Deere X495 2WS, Diesel 3 cylinder with a 62 inch hydraulic deck. Recently the PTO has had an intermittent problem starting. Sometimes it will start OK and other times it will take 8 or 10 tries of the...

I did not get any response in the "lawn and garden" section. I have found a couple of x495's. One has about 180 hours and is $7800. The other looks a little more rough, has close to 600 hours and is $6800. I can't find what they cost new, and wonder how good or bad a buy these would be. Thanks...

I looked at a couple of used x495's today. I don't know what they cost new and I'm not sure how old they are. One had 180 hours, looked a little better and the price was $7800. The other was a little more used with 575 hours and was $6800. Are either of these a good buy? JC

I'm about to do a 50hr service on my JD X495 and my dealer says that if the blades need sharpening, you should replace the blades. I was thinking that if they are not too bad that I would sharpen them, what is the correct thing to do?

Well my wife just spent a couple of hours on our newish (20hrs) JD X495 cutting 5-6 inch tall grass (not lush) and came in saying the blades had stopped. I went out and checked the machine to find the temp gauge in the red. I switched it off, let it cool down and checked all the obvious, the...

I accidentally left the key in my X495 a few days ago, and one (or both) of my twins turned the key on during one of their climbing sessions and left it on. That was about 3 days ago. Of course the battery is dead, but I'm more worried about other things. Are the glow plugs damaged/destroyed...

anyone know if a front blade from a x495 would fit on a 2210?

I'm looking for feedback on a deal I have open in northeast Ohio. A new 2005 JD x495 w/ 62c deck. Lists for $12,179. I have negotiated a price for both of $9,500 before sales tax. In addition, this particular dealer is willing to allow me $1,500 on a Lesco brand 52" landscape walk behind w/ 2...

What should I expect cost-wise to add the 3-pt hitch, rear PTO, and a tiller for my X495?

X495 throttle up \"whump\" A normal start-up on my X495 is a gradual throttling up, usually taking a minute to a minute and a half. It works out right because that's about how long it takes me to drive to where my trailer is, and most of my yards are further off than that. I've noticed that...

I'm getting ready to do a break-in oil change on my X495, and I was just wondering why it has two oil caps. In the Service Engine section of the owner's manual, it says to "Remove oil filler cap (D) or (E)." If it doesn't matter which one you fill into, why have two in the first place? I have...

I traded in my GX335 for an X495 a couple of weeks ago, and after using it a couple of hours last weekend to haul some brush, the above question quickly came up. The owner's manual states "allowing engine to idle for long periods of time will waste fuel and cause carbon buildup." 1. I'm going...

I just ordered a 3 pt hitch for my x495. Has anyone ever installed one on their machine? My dealer says that I shouldn't have any trouble.

Need info on how to disconnect the reverse safety switch that engages while using snowblower attachment? Any help greatly appreciated