international harvester 3414

Looking for some in sights on a few connections i am not able to determine correction location. tach cable???

Hello, 1962 IH 3414 filled with calcium(?) leaking around valve stem. How to repair, can it be welded, do they make repair patches ? Thanks for any help, Chuck Schettler Shippenville PA.

Hello everyone. I recently bought a 66 IH 3414 diesel for my landscaping projects this spring/summer and have been loving the machine thus far. However it's missing the oil bath for the air filter. It has the metal mesh element and it seems to have all the other parts. I have three questions and...

thanks for adding me to the membership. I have a international 3414 that I am trying to get back into working condition.

Ihave a IH 3414 With a bd154 diesel and 3120 BH. I have no idea of the year. The serial # is H631 and it was built in Hamilton Ontario from the ID tag on the front loader frame. hope someone can help identify the model year

Ok guys, this post will be a picture heavy illustration of my disassembly of the front valve bank on my International Harvester 3414.My machine just so happens to be a bc144 english gas burner.. I am also posting this as quest for help and suggestions.. I know there are few posts floating around...

Afternoon all, I have a gas 3414 loader that the loader controls need rebuilt due to a broken bolt (if looking at the right side frame, it's one of the bolts accessible through the frame for removal. Anyone have experiance pulling the controls? Only way I see is to remove the tanks and take it...

Morning, I was moving snow with my 3414 loader and all of a sudden my right foot was getting soaked in hydro fluid:confused:. I thought I blew a line but after limping it back to the shed, I saw a bolt was backed out. When I pulled it, it came out and the end was broke off:mad:...The bolt is the...

Hey guys I have done a lot of searching and have plenty threads regarding these old odd balls but none that has been helpful to my issue..... Let me explain my issues and any help will be GREATLY appreciated.. I bought an old 3414 case IH backhoe.. I think the backhoe part is another model...

I have a tractor loader hoe industrial that I need to remove the rear axle . the first thing inline from the tube is the outer bearing retainer. the ears with the threaded holes snapped off and the outer bearing started creeping out of the housing nearly an inch. I will need to remove the axle...

i have a 3414 gas motor ,.i am looking for info in what carb is supposed to be on it. the one i have is too small and it wont run right. anyone with info would be a great help

I am looking for replacement teeth for my backhoe. It has 5 teeth and 1 is missing when I bought it. I am looking for 1 or 5 depending on availability. Thanks

Does anyone know the best place to get parts for my IH 3414 .its from the 60's. I need a fuel tank. The places I found via google were if no help. Any info would be greatly appreciated.

I need to replace/repair the final drive gasket for my IH 3414. I called Komatsu and they didn't really follow up with me. Do I need to badger Komatsu, or is there another place I can go, or can I build one as good for less $$$? Thanks in advance. Dan

Hi Hope all is well with everyone I really need to get my backhoe fixed but am having trouble finding a rear axle and parts that go with it. It is a 3414 with eight lug spaced eight inches. If there is some International Harvester people out there please help. Thanks.

I'm looking for a new replacement or rebuilt carburetor to buy. It's for my IH 3414 that has a Zenith 2-barrel stamped (British Made VN). If I cannot find a replacement, I would try a rebuilt kit if anyone has one for sale. Thanks

I have been calling and looking everywhere for a torque converter for my ih 3414 diesel loader/backhoe. Any help finding one would be greatly appreciated. Thanks, Jim

What should the oil level be in the oil bath air cleaner on my IH 3414? It has an inner cup and an outer cup. The outer cup has an oil indicator fill line. Should the oil level in the inner cup be the same level as the outer cup fill indicator line? I have not been able to find any...

Hello I am new here to this forum and I have a question, my dad has a International 3414 that needs a carb. The tractors serial # is "600791" does anyone know what year this may be, and can the carbs be rebuilt fairly easily or are they better off junked the tractor has set outside for...

I bought a IH 3414. It had been sitting and the battery wouldn't hold a charge. I replaced the battery thinking the red cable was positive. Unfortunately, it had been replaced too. The red one was negative. You can guess what happened. Did I blow the alternator? Where should I go from here? Any...

I just bought a IH 3414. The PTO has a cover bolted over it. It looks factory. Did this model come with PTO? If not, can it be converted?

I have a 69 IH 3414 diesel with the loader that I want to sell. I have no idea what it's worth. The engine was gone through recently, and I have all the receipts for it. It needed a new sleeve and piston, and the head was completely rebuilt. It is in great condition, hydraulics work great...

I know there are other IH3414 owners on this site lets put our heads together on some parts issues and see what we can get accomplished, I am wondering has any buddy esle had problems with the rubber T under the Hydraulic Reservior, Its Seems Like I Go through one a year at Sixty dollars A piece

If you have one of the units, or had one, please drop me a line. Wondering if you have manuals for one of these> If you had a diesel, which brand and weight of engine oil did you use? Also what weight of hydraulic fluid do you use??? Am getting one end of month, what have you found to be weak...

I have a IH 3414 loader backhoe that is in need of check valves. They are a nylon ball or tri point ball about 1/2 inch diameter. I tried many souces to find these but I havent been able to find a source for them. Does anyone know where I can get them?????????????? Paul

I have a IH 3414 loader backhoe that is in need of check valves. They are a nylon ball or tri point ball about 1/2 inch diameter. I tried many sources to find these but I havent been able to locate them. Does anyone know where I can get them?????????????? Paul

Hi, I'm new to this group and wow, what a group. This web site is the greatest. Just bought my TLB (picture attached). I posted my problem in "parts/repairs forum" on this site. I am so happy to now have a tractor I can't sit still at night. Maybe some of you out there can help me. Thank you.

It apears that the Lucas destributer on my TLB(yr.1963) is not original equipment b/c the dealer can't match up the right set of points. Hopefully attached is a picture of what my setup looks like. Does anybody recognize what tractor this setup is off of so I can get a part no. Thank you.