branson 4720h

Was working changing the fan belt today . and I think the alternator power post touched the frame .. I heard what I thought was a sizzle noise like snow on the hot muffler. Muffler was hot but no snow in site. Then i could smell burnt after belt change I tried to start tractor no power...

I am looking to replace possibly some pistons and rings in my 4720h. I contacted 2 different dealers and found the price for a set of rings on ONE cylinder at approximately $250. Read that $1,000 for a set of rings for all 4 cylinders. Pistons were about $230 each. I have never heard if these...

My newly acquired Branson 4720h has been smoking at startup and then just a bit if running at mid to higher rpms. I spoke with the Branson dealer and he thought it might be injectors. So, I tested them and did a compression check. One bad injector, one bad glow plug and the following cylinder...

Hello all. I bought an older Branson 4720H which I believe is a 2007 model. The tractor smokes a lot. Blue smoke but also white. The fellow at the shop I purchased it from (not a Branson dealer) sold it to me as is and thought it might need rings. In going through the tractor, I decided to...

What is this tank? What oil do you fill this tank with?

branson 4720H leaking steering doesnt seem to be leaking around the chrome rods but back a little bit on the body of the steering oring ?

Well the Branson 4720h got hit hard in a flood first thing I did was drain oil in engine very little water in there. Then I drained the hyd fluid a lot of water drained that and pulled filters. Well I was driving it around to help clean up and move things. It痴 slowed then stopped moving. I...

My right hand seal is leaking, I was curious if anyone has the part numbers that they used to replace these seals? I believe it's FE78010000A

Can anyone tell me the metric screw size for the PTO spindle cover on the 4720h. A buddy of mine borrowed my tractor, removed the cap to attach a mower, then returned the cap, without the screws. He said he lost the screws in the pasture. These are metric, but I'm not sure what size. Anyone...

I'm looking at a 2015 Branson 4720H with only 50hrs. The dealer is going to sell it to me for $19.5k with the Titan 48" pallet forks. The tractor looks like it is in mint condition. Previous owner kept in shed. I don't have any experience with tractors and wanted to know if there are any...

Purchase my first tractor ever 1/7/19. I got the Branson 4720H largely in part on what I have been reading on here and other reviews. I was dead set on the New Holland Boomer until a friend recommended that i look into the LS being they build the New Holland and I could get it cheaper. In doing...

I have so much stuff in radiator when I cut tall grass. I use a heater hose with low pressure to wash out radiator and oil cooler is that ok I don't want to bend fins.

where do the swing chains go on a bran son 4720h tractor. they broke off and I cant see where they were

(I also posted this in the Comparison forum, but I'd like to get input from Branson owners.) I'm considering buying a recent model Branson 4720H with just a few hundred hours on it. 1. Is there anything in particular about this model that I should check or ask about before buying (such as the...

I'm considering buying a recent model Branson 4720H with just a few hundred hours on it. 1. Is there anything in particular about this model that I should check or ask about before buying (such as the jerky 3 point hitch on the Kubota L series)? 2. Is $15,000 a fair price with a FEL? 3. Can...

I purchased my first Branson tractor and it has about 80 hours on it I was going to do some mowing and when I switched the PTO to link the light comes on but the PTO does not engage maybe I am doing something wrong have the gear set at 540 I tried both ranges does not engage

my tractor creeps forward and reverse so I have to play back and forth to get it in neutral they say loosen adjusting screw and move one not forward or I backward , so if I set it back one one not backward will that affect the for forward wont the reverse, also I just changed my transmission...

what brand of hydraulic oil is used in the 4720h branson tractor

I had leak in front spindle so when I removed oil seal this spring type o ring came out to I have no idea what its called and so dealer in my area is not giving me proper information for part and wants me to bring it to his shop . I only want that part , I might try a dealer in another area ...

Theres no transmission screen on my 4720H? I just pulled my cover off the r/h side.is No screen in this tractor. Dealer said after a certain serial number there's no screens. No need to reply except how do you delete a post?

Wow sort of surprised.50 hour service is coming upand the owners manual calls for 10-40..the only cj-4 rated diesel oil I can find is rotella t5 10w40 semi synthetic..seems a strange weight for a diesel motor. Are there benefits to using dino oil for break in? valvolene 10-40 maybe?

I use and run a lot oh heavy equipment at work from trucks to loader skidsteers, dozers graders all kinds of things. I was really worried about buy the branson but after hearing from a few guys i did and i love it. Its really is a very good and pretty heavy duty tractor been putting a lot of...

The closest dealer/service is 80 miles away (for any brand) and he showed me a used 2009 4720H with FEL and 6' bush hog for $12,000. He has just completed a complete engine overhaul because the current owner did not perform his daily or pre-start walk about and check the fluid levels. There...

I am a newbie looking to purchase his first and hopefully last tractor. I have been talking to dealers, tractor owners, checking different tractor forums to try to determine which tractor will fit my requirements. I am looking for a tractor capable of lifting 2000 lbs (have small boulders to...

What rpm on the dash to get 540 at the PTO. And what does this dash mean with the 2 540 PTO ranges? It has a lever for 540 and down is 780 rpm.

So far so good, 20 hrs of clearing brush & fallen trees. I am impressed with the lifting pulling power.

First things first: GREETINGS TO ALL! New member here and I'm looking forward to many interesting discussions concerning the object of our professions, hobbies, toys or however you describe all things tractor. I'll get to the point. After extensive review of this forum, I was ready (I...

Last week I bought a used Branson 4720H with 74 hours on it. I've been using it to pull logs out of the woods and then stacking them on a deck that I'll have hauled to the mill. On Sunday it started to whine loudly when I would drive up a hill to take another turn down to the landing, it would...

Branson 4720H tractor only 2 hrs