425

Our new 425 has the quick-attach feature that our old one didn’t have. I’m about ready to swap out the grapple bucket and put on the auger head. I got the run down from Terry on how to take off the grapple, but I didn’t think about any particulars hooking up the auger. I know there are the 4...

Seeing our old unit sitting with the failed pump, I keep thinking about it and what might be able to be done with it…thought I’d ask your opinions… I know that a new tram pump (replacement for the Sundstram Series 15) is terribly expensive, and again this is an old, 2001 unit with a lot of...

On our new 425, I’m having trouble (typical for me having troubles😆) with the Float feature. I had found it on the old 2001 unit by accident and found it to be easy to use. (Only glitch was sometimes the joystick would “fall out” of its Float position, but I’m sure that 20-plus years had a lot...

When changing out the steering cyl do you have to bleed the air out of the lines before hooking them up? And if so, how do you guys normally do this?

Our old 2001 425 (Kohler CH25) has been doing fine since repairing the last issue. Now it has started having terrible trouble moving—reverse is struggling, and while trying to back up a small flat trailer with it on a slight incline, it struggled more and eventually stops moving. But whines...

Latest episode: seems to be losing some power when on inclines (does great going downhill! 😜) and I have a lot more “whine” I think coming from the front one or both motors. And backing up on a steeper incline it almost won’t do now…am I looking at bad wheel motor issues?

Forgive me if I’ve asked before and can’t see it in a search (my brain is not up-to-par with aging) My 425, hydraulic oil tank dipstick under the seat, is short (maybe 3-4”) and no markings. Anyone tell me what the correct level would be? Thanks!

I am looking to get a 5’ Woods box blade for my Yanmar SA425. It will mainly be used for driveway maintenance. The BS60.20 weighs @400 lbs and the BS60.30 weighs @500 lbs. The Woods dealer recommended the lighter version for my Yanmar. I am relatively new to attachments and hence seeking advice...

After around 30 minutes of running my engine will shut off. It starts right back up with turn of key. This always happens when I am moving and never has happened while using the backhoe. Sometimes after restart it will happen a few times in a row, either immediately or a couple minutes later. I...

Hello all. I'm relatively new to the tractor world, or really any hydraulics in general. That being said, I'm the type that fixes everything myself and tries to become an expert on anything I own. I have had an Allmand 425 TLB now for about a year. It has been a wonderful machine with tons of...

So, today my bucket is giving me issues. When I move the joystick to tilt the bucket down I have the following issues. If I move the joystick all the way over the bucket will curl up and not tilt down. If I move it slowly the hydraulic pressure decreases and gravity moves the bucket down...

Got a call from a Corporate Yanmar rep. They're surveying customers. Basic questions: how satisfied are you with your tractor? Would you recommend us to a friend? Have you contacted Yanmar and were they responsive? I took the opportunity to discuss the dealer network needing to be built...

I am thinking of moving up to a larger machine and wanted to put some feelers out there:) I have a PT425 with bucket, brush mower, finish mower, mini hoe, forks & hitch mount. I have been looking for a 1430 or 1445 but have not come across a clean used one. Please message me if you have one...