Search results

WN9QNI,W9QNI,K4FFR,K4FDG,K0 AT RG AFB MO,K0 AT FORTUNA AFS ND,K4FAI,F7AH,KL7FBI,KA7MB JAPAN K4KEP AND THE REST I HAVE FORGOTTEN ACTIVE SINCE 1951, AF MARS,NAVY MARS, SHARES, SKYWARN COORD FOR OVER 35 YEARS 73 SPENCE

Wanted detailed close up pictures of Power Chute on JD 62C mmm for 2305.

If you are going to use it for temporary human shelter, for goodness sake have "T W O ACCESS PORTS OPENING INWARD". Having a single access could be your last sight of daylight forever. Human safety is number one priority. Why build a shelter if it is possible to be converted to a tomb and...

Nuru Are you going to be the only one running it? Will your wife need to be able to hook it up and start it. Will you need the tractor during power outages for other things. Do you want to put that kind of hours on the tractor for a possible extended period of time. In that power range, if you...

I am not talking about local dealers. I am talking about corporate. They are the ones who are responsible for manufacture and are supposed to QC products. My new forks were apparently npt QC'd. it takes a 10 LB maul to move the forks. That is NOT QC.

So far I have not been able to find one. Do they think they are so perfect that they don't need customer feedback

For my 2 cents. I have to have emergency power for my EMERGENCY COMMUNICATIONS station. the PTO unit will be great for around the micro farm but for home and EMCOMM I have a Onan 5.5 KW which is like the ones used for motor homes. Caution. Get the lowest RPM you can. Their life span is much...

Ozark Hollow, I see you want a PAUMCO QUICK SPADE also. I just bought one from Northern TOOL BUT!!!!!!!!!!! When my Frontier Forks (AP12f) for my JD 2305 came in today, did I get a shock. The pallet forks are too wide for the Quuick spade to fit. The JD Frontier forks are 4-23/32 wide and the...

What are they quoting for the 10 KW Deere PTO Generator. I have been looking at the Northern Tool 7.2 kw and 13 kw. $829 & $1300 respectively. Plus add cost of drive shaft assembly. Don't plan on mounting it solid on a concrete foundation. Remember it needs to be movable. SPENCE

Cheaper dump for MC-519. See Question on 2305 MCS - Page 4 - TractorByNet.com

Hey folks! For you that wanted to make the MC-519 into a hydraulic dump trailer how about a 12 volt electric actuator 3+ or 7+ or 11+ stroke from Northern Tool part numbers 125010 or 125011 or 125012. Northern Industrial Linear Actuator 12 Volt, 11 13/16in. stroke | ATV Accessories |...

mscheer772 I hope that 13000 Sq Ft was a big error in calling it a large field. That is a bit over 1/4 of a acre. Or do you have so many lakes that it is hard to find a field as large as 25-100 acres? Maybe you need to think quarry instead of garden plots. Ha Ha

cast_and_blast Spring has sprung and summer is here. Any chance of those detailed pictures.

Scott, Could you please post a closeup picture of your modified hitch assembly for the JD 2305 and MC-519 cart. I have the cart on hand now. Also did you buy the POWERFLO KIT separately or with the bagger? My cart came with a POWERFLO KIT for the x425. I don't think that is the same as the...

Reference the JD 2305!!!!! Does anyone see any solid reason why the Powerflo turbine will not work with the MC-519 cart. Does anyone know what the cost would be without the bagger assembly? Is there any compatibility problem with the Powerflo turbine and the GATOR blades.

Thanks to all for the comments.

The biggest brush grabber that Northern carries is only medium size to the large one that BAC makes which sells for about $130 plus shipping direct. That one is a monster.

Northern Tool has 2 models of the pallet puller. 2000 lb is $34.99 and 5000 lb is $49.99 They also have small stump pullers. I opted for the larger version which Northern does not carry yet, with a 5" capacity But costs over $130

jdbower Is the mcs on your 2520 a 2 or 3 bagger or a mc-519? I had a dealer tell me that the mc-519 absolutly will not work on the 2305!!!!

Rome was not built in a day and i have absolutly no help. My speed is snail. Or are you volunteering

Those fittings look a lot like the Air Force used on aircraft and GROUND POWER HYDRAULICS and some fuel lines back in the 1960-70 period. I do remember that those old fittings were 2 piece only. Picture #3 has a third part which looks like a locknut. Gosh if I looked hard enough, I might even...

Are any of you experts on Vermeer round balers from the lasy 20 years? I would like to try building a few small hydraulic accessories and think a Vermeer junk yard might be a good source. What general diameter and lengths were used. I assume all will handle pressures in the 2000 to 3000 psi...

I bought the Leinbach PL-12 carry all with frame. See this URL of the bare bones unit. Leinbach Carry All Then I added a cut sheet of 3/4 exterier ply wood, painted and the trew a sheet of scrap metal on top to protect the plywood whenhauling concrete blocks. One of the tractor shows near by...

I bought the Leinbach PL-12 carry all with frame. See this URL of the bare bones unit. Leinbach Carry All Then I added a cut sheet of 3/4 exterior ply wood, painted and the threw a sheet of scrap metal on top to protect the plywood when hauling concrete blocks. One of the tractor shows near...

I got tired of on and off the tractor when the cable or chain would slip off so this fixed that problem. The boat type winch helps when just lifting something in one place. Doc said I should not be lifting heavy stuff. How in the heck can you go day to day without. Still have to do some more...

Fellows and Gals. I think most of you missed the whole point. I don't have mirrors on my JD 2305 and for about 6 years have trouble even turning my neck 90 degrees sideways. To look backwards, I have to turn 90 degrees around in my seat and that is hard to do. Going to add a vidieo camera...

Thanks John Bud qni51

Especially if you are elderly and have restricted neck motion. For my 2305 I got a 12" 1/4" 4" x 4" angle iron and a receiver adapter from harbor freight called step bumper receiver 97019-1VGA @ 19.99. Bolt the angle iron up or down on the front quicktach bar and the step bumper receiver on...

3 PTH model..... Considering taking the engine off of the 5 hp (1/2 a) 3pth tiller for my SS18 Sears and putting on a PTO to gear box, to V belt drive. No sense in running a gasoline engine and the diesel JD 2305 engine both. Tiller width a bit narrow but will be better than nothing or a spring...

Can anyone tell me the Hi and Low speed range of tiller blades?

May I suggest that you all that are having problems with battery life, get a ADC 1.3 AMP pulse charger from Northern Tool or other source. I have auto "type" batterys which are maintained on this brand of charger maintainer. 2 of them lasted over 10 years. Use of a pulse maintainer helps to...

73 SPENCE K4KEP SINCE 1951 EX W9QNI/3/4/5/6/7/8/9/0, /V02/VE4/VE5, KA7MB(JAPAN), F7AH, KL7FBI EX/ AF9QNI,AFA2YR AND QUITE A FEW OTHERS

Although a cigarette lighter socket is included on the 2520, jd seems to want to cut back on the 2305. Is there a recommended location to add one on 2305? Also does anyone have a electrical lighting circuit skinny. Looking for "best approach" for adding rear lights and beacon light wiring. Have...