Search results

I've always taken my MMM off in late fall prior to putting on front blade for plowing. The 72 inch deck is a monster to move around and store. So I was thinking of just pinning it up and leaving it on for the winter while plowing. Has anyone else done that? I not sure what harm it can do...

I used to mow with my cab B3030 tractor and a 72 inch deck. Then bought a zero turn with a 60 inch deck and cut mowing time in half, but the tractor mower stays unattached these days. So now I use my tractor for the bucket to move dirt in the summer and plow snow in the winter. It comes in...

Top of my B3030 engine there is what looks like a pump of some sort. The belt moves constantly, but the flywheel attached to the pump only runs periodically. Is this an issue of is that correctly operating ?

The foam molding around one of the glass doors on the Cab of my tractor has come loose and is hanging down. It won't stay put by simply pushing it back on. I was thinking of using a spray adhesive. Has anyone else had this issue and if so what did you use to fix the issue? I did contact the...

I purchased a Z force SZ commercial unit to mow 8 acres. I get tossed around a bit since there is no seat belt. Has anyone else put a seatbelt On their mower. Or is there no seatbelt because there's no ROPS?

I'm looking at a new cub zero turn, but also just sold my push mower. When you have a zero turn do you need a push mower any more, or will it just take up garage space. I'm mowing 7 to 8 acres, many trees, some good slopes, The only thing I thought I may need a push mower for is around the...

My B3030 has a 72 inch MMM. The left side. (while sitting in Tractor) is lower, actually the wheel touches the ground. The right side picks up nicely off the ground. What/where is the adjustment to raise the left side. Thank you.

I have an RC72-30B (on a B3030 hsdc) Mid Mount Finish Mower. The Anti-Scalp wheels have broken loose from their inner metal post rings, and come off while mowing. I've tried gluing them back on a couple times with different glues, but to no avail. I can purchase them from my local Kubota...

My Kubota B3030C Cab model has a hard hydraulic line that attaches to the right (while sitting in seat) side of the motor, just above the fuel filter. The crack is just back of the connection to the motor. I was thinking of putting on a rubber clamp to seal off the crack so I could continue to...

What is a tractor for, if not GRIEF! Every year I get a no start. What a pain. This time I mowed for a couple hours and when parking I shut the engine off prior to pulling my PTO lever to disengage. No big deal, that happens periodically, atleast I thought no big deal. I went back to start...

I have a B3030. Somehow last week I totally destroyed the MMM linkage on the right side. Bent the arm into a C and snapped it off. The fork that connects to the deck and frame was twisted. Still don't know how it happened, never felt it. Just saw the linkage hanging after parking. I got...

For those of you who have purchased shop/owners manual(s) I see both a shop manual and owners manual written about, I want one that describes fluid changes, types, amounts, frequencies, belts, switches, ets. general maintenance items. Is that the Owners Manual. Then the Shop manual is if...

Mowed Grass tonight with a MMM. All went fine until I wanted to check the operation of the other PTO positions. With the PTO disengaged I moved the lever to the middle position, then to the back position and again to the Middle position, the lever was very stiff, in the mid position, both mid...

:mad: finished mowing last week pulled into the usual spot, shut it off, nothing out of the ordinary. Got in it today, nothing! It acts like the PTO gear is engaged, but I fussed with that back and forth watching the safety leaver go in and out, checked the seat, unplugged the seat, held the...

Anyone have any success in finding a B3030 turn signal lens outside of a dealer. The OEM lens is a very expensive.

I have a 16x20 workshop. Its insulated with interior finished walls. I was thinking about a ceramic wall propane heater, but have been told that this wil create too much moisture due to being unvented. Your thoughts based on the type of heat you have found to work in your shops.

my tractor blew a hydrolic line and blew a substantial amount of fluid on the lawn, and killed a large area of grass. Is there anything I can put on this area to regenerate the lawn this growing season? The last time this happened it took 3 years for the grass to grow back.

My cab AC does not blow cold. I checked the coolant a few months ago and it was low. So I injected new coolant, however it still does not blow cold. The A/C unit seems to be working, it clicks on and off and the belt runs, not sure what else needs looked at.:confused:

Late last winter I had a main hydrolic line under the cab, of my 2.5 year old unit with 200, hours, spring a big leak and drain all the fluid, very expensive to fix due to the cab, which was just out of warranty :(. Today I got another hydrolic leak:mad:. This time the silver line on the left...

Has anyone added their own refrigerant to the AC system in their B3030 or is this something better left to the shop to do? I have no pressure gauges if they are needed. Is it normal to need refrigerant after 2 years. I noticed last year that the air was just moving around and not cold.

ATI Quick Attach front end for KUBOTA LA403 loader arms. Pictures show date of 1-1-2004, however pictures were taken 3-19-2010. Batteries were changed in camera and I forgot to change date. Quick Attach is 2 years old. Not out in winter, loader is stored in winter, not used much in other months...

I have an ATI quick attach front end on my loader arms. I had a Skid Steer quick attach bucket on the front. Disliked it from the day I brought it home. I've sold the bucket and am looking for a more standard tractor type bucket with a Quick Attach. Anyone know where they sell these type...

I need a new front wiper blade for my B3030. I went to the dealer and the blade was $25.00. Just seems expensive for a 15 inch wiper blade, not knocking the dealer, they buy from Kubota and have to make money also, but has anyone found a blade at a Walmart, or Tractor Supply or anywhere else...

I was working fine until I put a new load of fuel into the 3030, now I get low power on and off and I need to push the throttle back to idle to stop the problem. Could I have gotten condensation in the diesel fuel, and if so what do I put in the tank to absorb the water. I know in a gasoline...

I have a Winchester model 94 top eject rifle. Had a small front mounted scope on it (pistol scope) but now have a side mount and a regular 3x9 scope. Question is that since I have to rotate the scope to the left this changes the cross hair directions, up and down is now left and right, and left...

I have a B3030 hydrostat trans and a cab. The front loader has a quick attach front with a skid steer quick attach bucket. I have power enough to pick up items in the bucket, but my issue is when I need to pick up the front end to slide the mower deck on and off the loader hydrolics are very...

I live in cold west central Pa and my shop is not heated, so in the winter my table saw and jointer sit in the cold shop and get a rust film on them. Does anyone have any good way of first getting the rust off, I usually use steel wool in the spring, and second what do you do to keep the rust...

I had in the past always plowed with a rear blade with my New Holland. However, This year when purchasing the B3030 I also purchased a front end hydrolic blade for snow plowing:D . The dealer showed me how to raise and lower the blade to the ground with the posts and shoes on each side of...

I sent a soil sample to Penn State for a piece of ground that won't grow anything, not even weeds. I received the report back that said I need 410 lb of lime per 1000 sq feet. Ok, the question, what is 1000 sq feet? is it 1000 long by 1000 wide, or is it 10 X 100 (or something similar...