Search results

yes, and apart from the fact it is a pain to bring the arms down manually, the radius stays the same.

I tired lowering the toplink to the lower hole and no effect on the rototiller. In my case, the radius of the rockshaft lift arms seems limited. I don't think it caused by any of the 3PH components, it seems to be internal. when I turn the feedback rod, it goes lower or higher, but the radius of...

yes, the first nut needs to be loosen and the back one is welded on the rod. Turn the rod clockwise and the 3PH goes higher when lever is pulled up but is limited on the downside. the opposite happens when rod is turn counter clockwise. see youtube video below for more info (not mine). I am...

Second photo shows the end of the rod located on the right side. It seems to go through the hitch assembly, the second photo (with fingers) shows where it connects on the other side, left. Could be the hitch pistons. When I turn this rod clock wise the arm goes higher and when I turn counter...

Thanks for your reply, all my stop clamps are locked on both extremities (see picture above) so it is not the issue.

Here are some pictures of the rockshaft in lower position. There seems to be a feedback rod on one arm, I have never adjusted this rod before, curious to hear what your experience has been with this part. Thanks for the welcome! Here are some pictures of the rockshaft in lower position. There...

Thanks for that Bruce, it is helpful to have this manual and I didn't know it was the same as a club cadet. Still need help[ with my issue if someone thinks of something...

Hi Everyone, I have a mahindra 2615 that has no draft control installed. I rototilled my field last year and it was barely tilling 6" down. This year, my attachment does not even touch the ground. The lever operates well, 3PH goes up and down, but it doesn't go down enough. I know most tractor...