Search results

Looking to buy a subsoiler w/ pipe-laying attachment. I will only use it very lightly, and don't need to go deep - so was planning on buying from AgriSupply PIPELAYER F/ASC 73410A + 3PT SUBSOILER RIPPER 1 totaling ~$325. They want $450 to ship it to a major metro in Idaho?? (I would pick it...

Small TLB here with a few implements that have bearings such as a pto snowblower, pto chipper. I've just used the same grease all around until now - but it's been nagging me and I doubt my lithium/moly grease correct for the "fast" or "spinning" interfaces. For the loader, BH, grapple, etc -...

Looking to make a cover for my sawmill and a few other less-weatherproof tools** which at least for a the next several years will be stored outside. I've tried tarps, but: with the relatively harsh & consistent sun we get they degrade faster than i'd like because they are fully waterproof (not...

None of the "datasheets" for relief valves I can find seem to provide a flow-vs-pressure-drop curve. I'd like to know so I can verify the heat load & pressure loss I'm incurring here is acceptable. --- I'm modifying my hydraulic system to function with a grapple as if it were built into my...

I'm thinking of buying some valves from Summit, but this will be my first foray into real modifications to my (or any) hydraulic system. I have my head around what I need and generally what the options are (I think, famous last words) ... Summit seems to be one of the only games in town that...

I need a D03 manifold & valves with slightly lower height. The common style with "DIN" connectors is typically about 6.5" tall - slightly too tall to fit where I'd prefer to mount it. The best option I've found would be these, with "Deutsch Connectors". The lower total heigh, around 5.5"...

Hyvair style D03 (ISO 4401) size valves&manifolds seem in common use for small TLB applications (summit kits for rear remote & port multiplier, w.r.long 3rd function kits). It seems that D03 spec valves are spec'd for ~16gpm or higher (plenty, my tractor has 7gpm) But all the D03 manifolds are...

My FEL completely cuts off the flow to the remaining PB. IE: when you're using UP/DOWN or CURL, rear remotes, 3rd function, etc cease all function. I understand this is ~universal. But why? here's the schematic from the manual (with some annotations to help, as these are hard to read if you...

I have a 6" pto wood chipper coming shortly. As most/all small units do, it has a dedicated PTO driven hydraulic unit. Various threads indicate this is roughly a 3gpm pump. My tractor hydraulics are 6-7gpm, and I'm obviously not doing _anything_ else with the tractor while the chipper is...

Trying to identify the fittings on my tractor vs what came with an implement. I have two that seem extremely similar except the fluid-lock (ball, "poppet"). Some sites such as Incompatible Hydraulic Couplers: ISO 5675 (Ball, AG type) vs. ISO 7241-1 report some issues in cross-compatibility...

have a ck2610. Happy with it (except for BH departure angle ... another topic). I'm making some hydraulic mods/additions and am not finding much specific information on the pump. Tractor is rated at 11.7 GPM. That is shared between the hydraulics, steering cylinders, and HST. Pump picture...

I have two problems where I've seen advice on TBN to solve with a "check valve": a cylinder "sags" - eg, my snowblower chute deflector. Set it at the angle i need; a minute later the deflector has drooped down. a grapple can experience very high pressures when, say, it's closed on a long tree...

I'm installing a power beyond. I'm asking this question from a generic point of view, as I want to understand the hydraulic system as much as I just want to get it done (I find that sort of understanding will pay dividends later). That said, my unit is a ck2610, with factory loader and dual...

had my kb2475l installed recently for the ck2610 i bought last year (backhoe took for ever to ship). I didn't make much of an issue with the geometry of the hoe as it's mounted on the tractor; driving my dad's small kubota CUT as a kid, he never took the backhoe off, and had no problem using...

will be using a 3pt blade to re-grade about a quarter acre area; its currently gently sloped, i needs to be ~level: some fill at the bottom, taking off about 8inches at top. Final cover will be mostly garden, with a driveway/turnaround on one side. We have ~easy soil (or i would not be...

Buying a PTO chipper. My rig is on the smaller end of viability with 21.7 pto hp. PTO lift is 1600lbs@2ft aft (also FEL + beet juice in all 4 wheels). My use case is primarily conifer (eg, soft), and mostly small (anything ~4" or larger becomes "firepit" firewood). The large input capacity...

pretty new to chaining anything. For my grade70 chains i dedicated to my tractor's trailer, i bought 'locking' style clevis grab hooks because it makes setup a tiny bit easier (no dropped hooks before i get it snug), plus theoretically in a "bad event" where there was a some momentary slack...

The kioti finally arrived! This is my first time using chains, and securing something besides a car (wheel straps) regardless. I've searched and watched the YouTube's to no avail Are my rear chains OK here on the axle? Until a big pin shows up in the mail I can't attach to the draw bar. My...

I'm not finding much direct comparison between WRLong third functions and OEM kits. I am considering installing it myself (mainly to learn more about maintenance). Both kits are virtually the same price. I'm on a kioti, and the instructions are from what i read - but i care more about...

I am 90% going to buy a grapple next spring. So am considering adding the factory 3rd function before the tractor is delivered. It's about $1200 installed (2/3 parts, 1/3 labor). I'm pretty mechanical and can install my own (although given reviews of the CKA162 instructions its worth the...

Thanks for your collective patience; "what forks to choose" has certainly been beat into the ground in various ways, but after searching and reading I still don't quite understand :) In particular the affect of implement weight on 'practical' lift (as a lot of the weight difference is in the...

hoping to get my water line run to my wellhead before the ground freezes more than an inch or three ... I have a ck2610 on its way, with backhoe and FEL (so ~~4000lbs), industrial tire tread. Its arriving 1st of November, so in my area it's be close, temperature wise, for the days to fully...

Just bought (due in November :( ) a new ck2610 (woot). I will use a snow blower, but haven't decided front or rear, yet, and since i won't take delivery until winter, I probably won't be able to make up my mind this year. Rear leaves the bucket (helpful) but requires taking off the backhoe...

Just bought a ck2610; thanks for all the TBN threads that helped me make the call on that. Haven't "owned" a tractor since using my dad's in the woods growing up, couldn't be more excited :) anyway ... I ordered it with the kl4030 (standard loader on the ck2610) with the quick-release 66"...