Search results

Could you send your email address

Could you send your email address

I sent you the drawings for the Ford 3930 Brackets, hope they help you.

Anyone out there that might have a Ford 3910 for sale. I guess I still miss the 3910

Sent to you drawings

The first tractor I ever tried to operate was a Ford 8N around a 1950 model. I tried to pull a tall thin field pine tree down, only to have it come down on me, wasn't hurt but I learned to not do that again. They were always good tractors

After looking at rear tires and prices until I was tired of looking, I went ahead and bought Galaxy Earth Pro 45 8 ply R1 13.6 x 28 rear tires for the Ford 2810 tractor. They are made by Yokohama and have a good rating. I am sure they will be good for as long as I am around to see them. Now can...

They were completely deleted along with others, I do have the drawing back, from someone I sent them to earlier

One of the good friends that I had sent the drawings for the loader brackets for the Ford 3930 and other ford tractors, was good enough to send them back to me, so if you need these drawings to have brackets made, I can email them to you.

I am going to have to buy new rear tires for the Ford 2810. I am pretty sure the rear tires are original to the tractor. They are Goodyear 13.6 x 28, weather and age cracked and one looks like it may have a boot in the side wall. Tires are very expensive now. What are your recommendations for...

I saw one on facebook marketplace today, it was 4x4, really nice condition

I once bought a Bush Hog brand loader without brackets to put on a Ford 3930. I called a few of the dealers that offered after market brackets, most had quit selling the brackets for that loader, one dealer had the shop drawings, and emailed the complete set of shop drawings for the Bush Hog...

Yes, I did sell it last fall, thanks for the inquiry

Anyone have a front end loader for sale that would fit this ford 2810 tractor?

I did find a brand at Tractor Supply that did meet the Ford New Holland spec M2C 134 ABCD for 60.00 five gals. So ready to go with new filter and oil / fluid The tractor has 1566hr on it and I believe changing the fluid is about 1200 hr Thanks for the help

Hydraulic fluid recomendation for the Ford 2810, prices from 44.95 5 gal. to 146.00 for 5 gal 134b and 134c I know normally you get what you pay for, but are some of the cheaper fluids as good as the higher priced fluids

I really like these Ford tractors, this is the second 2810 I have had, had 3 3930s and one 3910, for me they are some of the best tractors ever made. This 2810 was a two owner, it is a 89 model, the first owner having it about 20 yrs. It has 1566 hrs on a working tach, and is in really good...

Ok brake adjustment turned out to be a piece of cake. Loosened the lock nut and took up about 1/8 in of the threads and have good pedal now on both sides, tighten lock nut, drive around checking each brake pedal to make sure it is not grabbing on either side.

That makes sense, guess I am used to the drum brakes. I did look it over today, and can see the adjuster linkage, thanks for your help. I had a 2810 in the mid nineties that was in new like condition, never had to do anything to it, so didn't learn anything about working on it. Thanks again.

Just bought a Ford 2810 tractor that is in reasonable good original condition. Brakes need adjusting, pedals go pretty much all the way down, but will stop the tractor. Need some advice on adjustment. Thanks

I would be glad to send the loader brackets drawings, but the email that contained the drawings was accidentally deleted from my computer, maybe someone that I sent them to would share them with you and with me.

Anyone have an idea of what a red longstripe 78 International Cub in overall good average running condition would be worth? I don't have one , just wanted to know what they are bringing now.

If you will send me your email address I think I still have them

This is a nice YM 226 with factory mower, Power steering, 274 hrs. Asking $6800. Located in Hays Nc 336-957-0663

Yes sir, thank you for the heads up. Hopefully it is a more simple fix.

Great RandyT, That is the kind of info I am looking for, I want to fix it, not just play around with it, finding out the hard slow way. Thanks.

Actually I don't know for sure where the leak is. I saw oil on the floor under the machine in the fall, and would clean it up, thinking I had plenty of time before mowing started. I have waited as long as I need to because grass is starting to grow. The leak is not directly under the trans, more...

Yes, I agree, I have had this machine sitting on a jack with fender pan and rear wheels off for about a month just wanting to do everything it needs this time before I put it back together for mowing. I am learning to slow down and do it one time.

Thanks for the infomation. I don't mind taking things off that needs to be removed, just wanted to make this repair as straight forward as possible. Do I need to drain the oil out before I t pull the old seal out, or will oil level be below the seal while it is just sitting?

Anyone else that has replaced the differential lock shaft seal on a John Deere 455, that would like to give a little info on the best way to do this replacement. Like most things we do seems there is always a way, a better way, and then the right way to do it. I have never worked on one of...

Can you describe the steps to replacing the differential lock shaft seal? Do I need to drain oil level down some? did you have to lower transaxle to get to it?

I have leak on my John Deere 455 transaxle after it sits for while. So far I can't tell exactly where it is coming from. I have read about the possible places where they normally leak. It looks like it might be the oil filter area, but it is dry all around the filter. Could it be running out on...

Can someone tell me which CC tractor went with front loader 833? Trying to find about what size tractor the loader would work on.

I am looking at a Compact tractor Cub Cadet Front Loader model 833. Just wondering if this loader could be made to fit on a Yanmar YM 2402 tractor. I think the loader is close to the size loader I would need. I think brackets could be made. Would this loader be too wide, too long, or just not a...

There is a nice YM 186D for sale near Columbia SC listed on Craigslist. Just saw it a few days ago.

This is the 226 that bought last year, and then sold, then was able to buy it back recently. This tractor is in like new condition, was really regretting letting it go, I am very glad to have it back.

Here are a couple pics of the ym169

Here is a pic of the trailer after the floor has been removed

I bought a Hudson 5 ton 6.6x 14 trailer that had been setting for a few years, course it has some surface rust on it, the treated floor was weak in places, it is a 2000 model so I guess the floor held up pretty good. I want to put a new floor on it and have thought about red oak milled down to...

I am thinking about getting a Yanmar YM169 2wd tractor. I think these are around 16 hp 3 cyl diesel, gear drive, 3 low 3 hi. Anyone have one or know about them? Thanks

Here is a few pics

Comes with the Yanmar yqm 60 belly mower, 262 hours, original factory condition with power steering. $ 5000.00

I have decided to sell my Yanmar 226. This tractor is in really good condition and comes with a YQM 60 belly mower. This little tractor is a model that was sold in the US in the early 1980s, it is in almost perfect condition.

I have a Fredrick's rebuilt YM 2402D. I think it is similar to the YM 2420. Does yours have the powershift transmission?

Yes, my YM 226 has power steering, Wish it was 4wd. It is a breeze to mow with.

I bought a Great Dane Chariot 61 zero turn mower with 25 hp Kohler engine. The left pump seems to have some slipping, or maybe it could be the left wheel motor. Have not checked it out very good. I know these mowers have been discontinued. Anyone here have much experience with these mowers that...

The 3910 is doing better each day, started it this morning, very little smoke that cleared away in a couple minutes. I adjusted the clutch, now takes hold about 3/4 out, feels about right to me. I had a set of headlights that came off a 3930 that I installed a front loader on a couple years ago...

I reinstalled the radiator shell and guard along with the air filter housing and new inner and outer air filters, also replaced the pre cleaner that was missing. I could tell a difference in the sound of the engine, with that little extra tug to get the air it needed to run.

One thing I noticed with the rebuilt pump is that the lever that the stop cable attaches to actually felt like it was connected to something inside the pump. Before it was loose and didn't seem to do anything. I used carb cleaner to flush out the injector lines and the return lines. I started on...

UPS dropped off my rebuilt injection pump along with three rebuilt injectors this morning. I had cleaned up the area behind the pump and the new starter and painted it with some blue paint that I thought was pretty close to the Ford Blue. I started installing the pump about noon today taking my...

I should have the rebuilt injection pump back shortly, along with three rebuilt injectors. Apparently before I got this tractor someone had been into the pump and left something out of it according to the Man who rebuilt it. Should be good now. He is letting me use a modified injector with...

Still waiting on my injection pump to get back to me, so I can get this tractor going.

This is the Yanmar YQM 60 belly mower that came with my YM226 tractor. I found that these mowers were made by Continental Belton Co. and spindles and blades are available for them from Ag-Meier Belton tx.

Here are a few pics of my ym 2402D that is a Fredricks reconditioned tractor. I have owned this tractor for about 4 yrs.

Here is a pic of my ym 226 in like new condition with low hrs

A few years back I had a Ford NH 3930 that I wanted to install a front loader, It was a Bush-Hog brand loader The loader I had come off a Ford 3910 or similar model, and the brackets would not fit the 3930. After calling all around, I finally got in touch with a man at German-Bliss who was able...

About a month ago I traded for a Ford 3910 tractor that had stopped running. The young man that owned it said he was doing some light grading with a box blade and it just stopped running, and after he tinkered with it over about a month off and on, he decided it must be the injection pump. I...

My name is Paul, from Hays Nc. I have enjoyed tractors for a long time beginning with the Ford 8n. I usually have one or two tractors about all the time. I enjoy working on them and trying to bring them back to better condition than when I found them. Hope to find many friends here, and help...