Search results

My 4200 has an intermittent start situation that has become unbearable. I don't here the loud snap of the shut off solenoid. I dug out the thermistor, jumped it, still don't hear the snap of the shut off solenoid. I'm assuming the problem is with the solenoid. Does this sound correct? thanx...

My 4200 started fine the other day after sitting for a week. I ran it a couple of hours plowing snow, shut it down for lunch. Went out, no start. I figured water must have been stirred up in the tank and settled somewhere. I put the heat gun to the fuel pump, fuel filter assy. etc., drained...

Been on the fence about getting a posthole digger. Don't really need one but they do come in handy on occasion. Found one at auction, the price was too good to pass up. Just curious on what brand it is....any ideas? Thanx John

I have a 6x12 dump trailer electric/hydraulic single cylinder lift. I usually don't leave a battery in it, can't see the point of having a good battery just sitting most of the time. When I do use it on the road I put a battery in of course. This weekend I used it with my compact to haul 3...

I sold my mower and all the attaching hardware. I'm unable to get the quick connects for the lift cylinder unhooked. See attached pic. The tractors been sitting for over a week, I moved the control valve both ways and re-centered it and finally loosened the hoses.....they still won't budge...

My 4200 started leaking at the rear axle seal....getting bad now. Looked up parts diagram, looks like the axle needs to be pulled....holy crap. How involved is this repair? Thanx John

Hated to drill holes in my bed but I've been wanting to do this for a while. I go to a lot of auctions and antique tractor shows. Now if I don't have the trailer and need to haul something small I can. Mounted a bumper hitch to the floor and put the winch on a removable plate so I can take it...

Anybody who's looking for a nice tractor might want to come to this auction. I checked it out last week, looks to be in excellent condition. AuctionZip.com - Live Auction Locator - Fast,Easy, and Free! M.D.

This vulture's been hanging around for a few days now. I called a raptor rehabilitator but they said if I want to help it I have to catch it. Looks like it has a badly busted wing. Had some bologna that I threw out for it. Probably hasn't eaten in days.

When I built my forks I realized I should have built in more curl when they're all the way down. After an embarrassing mishap that I won't go into I decided I'd better modify the forks. I bumped the bottom out three inches. They work much better now. M.D.

Has anyone heard of or used Mesa brand tires. There's a dealer not too far away that will sell's them for $90. The seem to have decent tread and are load range E. Someone told me they're made by Cooper. Anyone have any experience with them? Thanx M.D.

I've had the #72 mower that came with my JD 4200 for sale, no takers. Then I got to thinking how hard would it be to convert it to a 3pt mower? Has anyone done this conversion? M.D.

Got the rebuild kits for my JD 420 loader. Took off one of the cylinders, removed the outer snap ring. Now what's holding the cylinder end in? I can rotate it but it won't come out. Thanx M.D.

The 420 loader on my JD 4200 started dropping a little as it it has air in the lines. It will drop about six inches then stop. This started suddenly this week. I changed the fluid, filter & cleaned suction screen last fall. I switched the lines around so the curl circuit raises and lowers...

Had to have new drain fields installed. What used to be nice thick grass is now rocky subsoil. I graded and hauled off eight buckets of stone. Ran the disk over it this evening and dug up many more rocks. I'm going to rent a York rake tomorrow and try to get it seeded.

Anybody know of a good inline fuel filter. I'm re-powering a garden tractor with a Lombardini diesel. There isn't room for a large filter and was hoping to use an inline suitable for diesel. The original Lombardini specs call for a 5 micron filter. Thanx M.D.

A buddy gave me an old 1056 Wheel Horse. I'm putting a Lombardini diesel in it for just putt'n around. What was the original engine pulley size? I'd like to keep the gearing/speed close to original. Thanx M.D.

My tractor came with 4 ply r3's. They started getting cracks in the sidewall which got worse after moving some pallets of block. I ordered new 6ply tires from Brutt Tires ATV Tires, Trailer Tires, plus all Specialty Tires: Brutt Specialty Tires got'em within 24 hours and $50. cheaper than my...

After using my forks to carry 1300 lbs of retaining wall blocks I realized I needed more rear weight. The rear tires just touched enough to get traction in 2wd. This weekend a friend of mine gave me 8, slugs as he called them. They just fit inside the rims and weigh 38 lbs each. They should...

My 4wd light doesn't come on. Does anyone know where the switch is that activates the 4wd light? I've determined the bulb is good. It does go into 4wd but I get no light on the dash. I've looked on JD parts, don't see it. Thanx M.D.

I was digging potatoes today and noticed my tractor won't go into 4wd. The shift lever moves but it doesn't engage and the light doesn't come on either. What happened? M.D.

Well I checked my battery tray, it was a little cruddy. Some of the fins in the oil cooler are eaten away. I cleaned up the cooler and re-painted it. Has anyone coated the tray with plastic-cote or something similar? I have a can of bed liner and am thinking of trying that. Anyone see any...

I'd like to make an adapter to put a quick hitch on my loader arms. I think it should be made of 1 x 3 or 2 x 4 steel tube that I don't have, however I do have some 2" I-beam. Is this strong enough? Thanx M.D.

I was working on a few projects when my old Lincoln G8000 quit. When I try to strike an arc I get very weak sparks. Tried switching amp setting and polarity. It senses 120 volts when I plug in a trouble light by revving up the engine but won't light it up. I pulled off the cover nothing...