Search results

The PM 9 was my preferred off duty/backup for many years. Shoots fine no issues. I only went to the Sig P365 due to the increased capacity 10-12. The sig weighs more but lots of that is in bullets which in my opinion is a good thing.

I was in Federal law Enforcemwnt for 31 years and carried a back up the last 10 or so years. The concealed Cary I found fits me the best is the Sig Saur P365. The very early one had some issues but Sig worked out the bugs. It can carry 12 rounds of 9mm and shoots true and straight. Just my...

???????????? INTERESTING.

Just remember a ditch bank requires two rear remotes. One to move the flail in and out and another circuit to move the flail up and down. Not sure if you can add two on a Massey 135 I've seen one before but not sure about 2.

I have a Bestco 65" ditch bank flail. I use it as a standard flail, ditch bank and occasionally to cut the sides of trails. With mine I recently changed out the hammers for Y blades which seem to perform better with grass. I have noticed when cutting trail sides you can't get up high, I figure...

I have a Bestco AGL 165 Ditch bank flail mower. Anybody gone to the Y blades on this one? If so where did you get them since I would also need the appropriate spacers? Emailed Bestco awaiting a response, but perhaps there is a better source. Thanks\Mike

This what mine looks like. No holes in Rops. I found that the big golf cart shops wanted the most money for the old tops. Call the smaller places and you'll get the best deal.

Think about getting a container. They are very tight and cut down on rust. Mine has a Ford 1920 in it no front loader but I have a ditch bank flail mower on the rear. I got a 40 foot high and you can lock it up tight.

I did the same thing. Most all golf cart get rebuilt after they leave the golf course. The rebuilds have tons of old tops since everyone wants the latest greatest, biggest new top. I called around and I think I payed about $20 bucks for mine. The guy threw in some mounting hardware an I was able...

My Ford 1920 wouldn't start the other day tried to jump start it with a k own good battery. Turns out the bad battery was still making it fail to start. Got a new battery and all is good. If yours won't jump start the battery may still be your problem.

The Allon series is the best. Supposed to be a new book out this summer. Most all of David Balduchi (sp?)is good stuff.

Lucas"Prince of darkness" My first car was an Austin Healy 100-4, my girlfriend now wife of 50+years had a Triumph TR 3. We loved them but agreed when we got married at 20 yoa to buy something more dependable. Ought a Toyota corolla. Boy I wish we still had those two cars.

Well my 1920 has let me down, inside of the fuel tank is very rusty. I've emptied it out several times and got lots of rust out but there seems to be an unlimited amount. There are no new tranks available for this model but I have a used one on the way. The question I have is to coat or not to...

I have a Ford 1920 that I primarily use to bush hog with. The PTO clutch has never worked well and after I purchased a Ditch Bank Flail mower for it the clutch failed causing a stripped upper PTO shaft. This part was not available from For/New Holland or anybody else for that matter. Ford /New...

Not sure where to put this but I posted a while back a search for PTO part for my Ford 1920. Received a few replies but had no luck finding the part. In the last week I have received 3 emails from new members referring me to different people with gmail email accounts. Contacted two of them...

Looking for an upper PTO shaft part # SBA322570870. Thanks in advance Mike from NC

Title says it all, wanted a Ford 1920 upper PTO Shaft Part number SBA 322570860. Thanks Mike from NC

My PTO clutch went out in my 1920. I have done searches for this repair and see varying degrees of success . What is the best, read most reliable, clutch pack to repair my tractor? I have heard Messick's is good (pricey) others mentioned AI Products. Since the most expensive part of this is...

This is a re-post from the Ford/New Holland forum. Not receiving any help and as you can see I need it to go forward since I have little knowledge of Hydraulics. I have a Ford 1920 and would like to add dual remotes to the rear. I do not have a loader and the tractor is kept 60 miles from my...

I did the same kind of thing for my Ford 1920. Only real difference was I intalled it over the ROPS. Works great.

I have a Ford 1920 and would like to add dual remotes to the rear. I do not have a loader and the tractor is kept 60 miles from my house. Looking at the Service manual it looks like I could add the remotes by accessing The two ports of the Combination System Relief and Diverter Valve Manifold...

I am in the process of adding rear remotes to my Ford 1920. I am trying to locate, or fabricate if necessary, some sort of bracket to hold the four hoses with quick disconnects in the rear of the tractor. I have seen them on tractors but I have done multiple searches and I would guess I don't...

This may be a "Tiger" model Hardee Rotary cutter, yes I know I have a leak in the upper seal. I measured what remains of one of the remaining blades ( so worn they come to a point) looks like 20" with at least 2 " to the inside of the cutter.

I recently purchased a Ford 1920 that came with an older 5 foot Hardee Rotary cutter. I can't find any ID numbers on it and it needs new blades. Is there a normal size for a 5 foot cutter or is brand/model specific? I can try to measure the ones on there but they are badly worn so I don't know...

My neighbor, who buys and sells tractors for a hobby, showed me his Oliver 1365 yesterday. Ran great no issues there but the PTO operation was confusing. There is a lever on the transmission case below the gear shift that moves side to side to engage the PTO. There is also a long lever that goes...

As the title states I just purchased a 4 foot Bush hog for my B1750. Just wondering if I need an Over running clutch? Thanks in advance Mike

Has anybody rebuilt their bucket cylinders on a 1640a loader. I don't see any real outside leaks but the bucket is dropping at an increasing rate. It just started after I moved about 7 large pines that died as a result of flooding due to hurricane Florence. I had cut them to manageable lengths...

After a long search I located some turf tires and wheels for my Kubota B1750. One if the rears, a 29 X 12.50 - 15 turf, has a leak around the rim. The tire is loaded with Calcium/ water. I need to find the right tube for it but so far no luck. Any ideas, I've looked at Ebay and Amazon, and...

I really would like to find some turf tires, which as I understand it, also would recall some new wheels. The current tires are ags which are ruining the yard which is normally wet. The current rears are 9.5 ×16 and fronts are 6×12. Anybody have any ideas where to look for some? Thanks, Mike

I am trying to figure out what I need to add "The Thumb" to the above tractor. It was suggested by customer service that a diverter valve from surplus center, part # 9-8602 would be an easy way to add the Thumb. I have never messed with hydraulics other than replacing hoses so forgive me if...

I would love to a The Thumb to the bucket of my B 1750. I don't know anything about hydraulics and looking at a 3rd function valve and hose kit it looks at twice the cost of the Thumb. Am I missing something? Just went through a major hurricane and it shure nould have come in handy. I have no...

Is there such a thing as an electrically powered thumb or grapple for the FEL on a Kubota B1750. Just finishing clean up after Florence and it sure would be nice to be able to pick up brush with the aid of a grapple or thumb. I've seen the ones that have to be plumbed into the hydro system...

My IH Cub Cadet 124 was running fine. Ha her out an running for about an hour 2 weeks ago. She was irty so I took her out again an last week an cleaned her up. A couple of days ago went to start her up (new Battery 2 weeks ago) an starter generator would just spin not turning engine over. After...