Search results

Anyone have the wr long rbg3 grapple? Any thoughts on the more exposed cylinders and hoses? Trying to decide between thst and the stinger grapple. Thoughts on single vs dual lid? https://www.wrlonginc.com/rbg3 https://www.echoeqpt.com/product/56-stinger-compact-clam-grapple-ccg

Interesting. Wonder what this means then. “The biggest change is increased room for air flow in the engine housing and around the radiator the radiator screen now can be taken out with out disassembling the air filter housing.”

I mean on the current 15 series not the updated one.

If one was looking to buy a 3515h soon are these updates worth the wait? Is it hard to disassemble the filter to take screen out?

How long until this will be on 3515?

Thanks for the info today.

Great thanks. Are their complicated engine electronics? Branson is pretty plane Jane diesel. LS has some funky electronic fuel governor thing.

No worries. Trying to consolidate my research. So are the capacities the same on bobcat and kioti, just measured at different heights?

Thought you were saying it was different on the bobcat. Now I’m confused. Ha

Isn’t that the same as this?

What is 4 link?

What did you decide? Figure out any electronics?

Never mind. Looks like kioti rates at a different height than bobcat.

Looking at the kioti ck2610 and bobcat ct 2025. Looking at loader lift capacity I see kioti is roughly is 1800# and bobcat is 1300. Is that correct? Is that about the only performance wise difference? Thanks.

Pictures 2 and 5 are sideways unless you click it. Seems to rotate to normal once big. At least on phone.

My woods is massively overgrown with buckthorn, box elder and garbage brush. I had a guy with a forestry saw come in and clean up part of the woods. However he didn't mulch everything as much as I'd hope. I have lots of big chuncks of woods and limbs down and splintered small stumps. I'm not too...

I have a Branson 2400h and the manual does not list the torque setting for the wheels (or I just can't find it). Any suggestions? Thanks

Good evening, I am in the market for a brush cutter but can't decide if I want to go with a walk behind like the DR or one that can attach to my Branson 2400H. I am torn because I have some open acreage that would benefit from the 3pt mower but I have some tight and steep woods where a walk...

Here is my current project. I have a few acres of heavy woods with a lot of downed trees. This current project is so I can clear a spot for the propane tank (building new construction). I was out for 8 hours yesterday cutting up this big tree and then a few hours today moving it to a new pile to...

Finally got some dry weather and we got the rough framing complete. Now we just have to wait for windows which are a few weeks delayed so not much more progress to be made minus the house wrap and roofing coming soon.

A few framing pictures. We can't catch a break from the rain.

I towed my small trailer the other day with random stuff from a house move down to my shed. I just mounted a ball to the draw bar and it worked well for me.

I've noticed on three occasions where there is oil leaking out of the filler cap's small breather hole(I assume that's what the hole is). The first time is when I drove it to a shop 3 miles away to get bucket hooks welded on. Second time was when I drove it 3 miles to change storage locations...

A few more grading pics.

Starting to backfill. It's slowly coming together. Sorry, not sure why some rotated

Pouring the walls today:cool2:

Setting up and pouring the footings. This is now up to date as this was today. Nothing scheduled until next week now.

Digging for the foundation.

Here comes the driveway. Finally, it was a pain walking back all the way with equipment to putz around brush clearing. Gonna be time consuming to plow!

Digging the swale. It is funny because the county is so concerned with this swale but after the winter we had and all the recent rain there was no water to be had. It is all a paperwork issue. Might turn this non useable area into a garden now or something. This is only part of it, it is...

I have seen a few new home project threads on here so I thought I would add mine. My wife and I purchased 6.5 acres last December and after a lengthy delay we finally began our home project. First I had to create a swale to direct the "100 year frozen ground flood" around my house so I could...

So I can afford one attachment right now (building a house, funds limited) and would like to clear some brush/trees/weeds/logs/debris etc. What one attachment will help me the most in this aspect? I know one attachment won't be able to do it all, but which will be most beneficial? I have a lot...

I am looking into buy a landscape rake. How much horsepower is required to pull a 5 or 6 foot rake? I have a Branson 2400H (24hp) and don't want to go too big. Will be using it to rake up depris (leaves, twigs, branches, some logs, rocks etc) and also smooth out my land after we build to prep...

This is the best I can get with the "front facing" camera. Light is poor as well. I will try and get more when I get a new phone.

I just drove my tractor about 5 miles round trip to get some bucket hooks welded on and when I got home I noticed it was wet on the front right axle by fill port. I checked the level and it is right on the mark. Could it have been too full from the factory and it just worked its way to the...

I wanted to get some weld on hooks and nobody local carries any so I got them from Ken. Thanks for the great service and fast shipping! I didn't have access to a trailer so I drove the tractor 2.5 miles to the shop. 20 minutes later they were on! I spent more time driving there and back. I am...

I am trying to find transmission/hydraulic fluid for my Branson 2400H. The manual says texaco tdh oil, 1893. Does anyone have a cross reference for a brand I can get locally? Thanks

Well I finally decided on a tractor. After looking at a used john deere 4100 and 4115, a used kubota 2710, new massey 1526 and mahindra max 25 (just to feel it out to see if it was worth a 5 and 6 hour drive to get nice used ones), new tym 293, used bobcat ct225, used JD 2520 and a new branson...

Still trying to find myself a tractor. I ran across a 2005 Kubota B2710 with 570 hours with a rhino 2406 loader and he is asking 11k. Is this a good price? Any comments on this model?

I found a 955 about 4 hours away. The tires may need to be replaced sometime soon and the right taillight cover is missing or broken. There also may be some rust holes in bucket, but hard to tell from picture. Other than that it appears to be in good shape from the pictures. They are asking...

I think I have narrowed down my search and it is between those two. I will first explain what I want to do. I will be mowing about 3 acres all the time. I will also use the tractor to haul firewood, pull trees, remove small stumps/shrubs, clear buckthorn, drag driveway, plow snow, maybe post...

I am looking to buy a tractor and ran across a JD 4100 that the owner says he put on a new loader. Looking at the picture it reads cx300. Is this loader compatible with the 4100? I can't find any info on the web about compatible models. On another note (this may need to be in buying forum) but...

Hello everyone, new here and have a questions about the most suitable equipment for my needs. I have 6.5 acres that I will be building on this spring that is evenly split between woods and grass/field. I will have about a 1500 foot gravel driveway. So I know for sure I will need something to...

Hello all, just wanted to stop by and say hi! I will be posting shortly about tractor recommendations as my wife and I have purchased 6.5 acres and will be building in the spring. See you around