Search results

Sorry late with a follow up. After further review looks like the joy stick was the problem. I contacted RK tractor guy and right off he tells me (email) there are no repair parts so I need to buy the joy stick control. Well it's almost $200, so I get it apart and find the bolt holding the...

Thanks... I checked hydraulics, nothing RK 37 specific so I contacted the RK tractor guy. I'll post my findings.

It goes into detent (float) just fine, but taking it is is a bear. The hydraulics are cable activated. So much so it moved the control mounting locking bolt. One bolt puts the control handle in a pivot mounts and the other allows for an angle adjustment via elongated hole. My old tractor (JD)...

Never lay down acetylene tanks when using them. Try gas and O2 as low as you can and increase from there. I usually start with 3lbs gas 25lbs. O2 I also prefer smaller tips. Remember it's not a gas axe. If you see and orange/red flame at the tip... the set up is wrong. Check valves (mentioned...

Do you do destructive testing for a living or is this from published data? I'd like to see your sources if that's OK. Thanks

Blades get paper thin from the (Florida) sand. The grass is (mostly) Pensacola Bahia. Broad bladed low profile pasture grass, tough and cuts well. My issue is mostly wearing out blades. I sharpen with a grinder as needed, maybe 2X or 3X, before the blades are wore out. My finish mower isn't the...

I looked at the other threads and like most... it wandered off into the weeds. Yep the posters talked about 'em, how they were made, can make 'em my self, hate the web site form etc., but actual experience was limited. Most were turned off by the price. I hope to get some real world, actual...

Has anyone used these and can report on their experiences? "They say" the blades will last 8x longer (not sure I believe that) and keep the spindles on a finish mower deck from being damage. They're expensive relatively speaking, but if they last longer ( I go through two sets of blades a year)...

All the 'circumstances' that led to the housing bubble in 2008 isn't present now. Completely different set of dynamics. People have money and willing to spend it, lots of cash buyers, and existing homes are 'currently' in more demand than new, due to the cost of labor and materials.

Plastic kiddie pools work in a pinch. Put the barrels on piece of plywood so it doesn't poke a hole in the plastic.

Thanks... I'm aware since I own multiple diesels.

If you can't do great things then do small things in a great way

I'll probably wait on the oil analysis too.

Here's the price list... https://www.rktractors.com/pdf/pricing/maintenanceproducts.pdf

Who's done their own 50 hr service on their RK37 HST? Interested to know if you went to/with RK for parts and lubricants, or did you source them else where? Did anyone send off the oil for analysis to Blackstone Labs?

Picked up my RK37 H yesterday along with 72" finish mower and 60" box blade. Loaded on my 22' flat bed/cargo trailer ... 105 miles.

Same HP (rating) but not at the PTO. I know the all differences in power, weight, hydraulics, engine size and torque, but match the tractor for conditions.... right? I've been at my home for 30 years so most, if not all my land work is done. I'm retired now and I cut grass (5+ aces in Florida)...

Time for a new tractor and I like the Kioti CK 2610 HST, pretty sure I'm getting the Kioti so..... Time for price check, what do y'all think? New 25HP 4WD Open Rops Tractor (2) Range Hydrostatic Drive, Duel F&R Pedals 23 x 8.50-12 R4 Industrial Front Tires 12-16.5 R4 Industrial Rear Tires...

Tractor 4100 4x4 hydro has been flawless for almost 2K hours. However... looks like there's an issue with the front axle gears or at least that's where I notice the issue. Tractor front axle jerks when in 2wd (front axle) and calms down after putting it in 4wd. When turning get the same result...