Search results

Mine appears to be wrong. Up = loader down; down= loader up. Something seems to be wrong with the hose connections. Been that way since delivery new last year. Different from my older ck35.

Getting ready to do 50 hr maintenance and ran into some confusing info in the manual. It says there are different filter assemblies for the "B series: Mechanical engine" and the "F series: electrical engine"???? I'm just trying to get the correct fuel filter element.

Replaced the glow plug relay and still no joy. If I run the tractor for five or ten minutes then shut off and restart, the light stays off. It used to turn off after the key was on for a minute or two. Anyone solved a similar issue? 2013 CK35 HST 550 hours.

Replaced the glow plug relay and still no joy. If I run the tractor for five or ten minutes then shut off and restart, the light stays off. It used to turn off after the key was on for a minute or two. Anyone solved a similar issue? 2013 CK35 HST 550 hours.

They're on the inside???

Anyone know anything about Hill Country Tractor in Elmensdorf, TX? They have good pricing on Kioti but are they legit? Any other dealers I should check out? I've had good luck with Texas kioti dealers; bought two from two different dealers but they don't seem to be in business any longer.

Mine's shot. Wondering if anyone has replaced it with aftermarket or oem. I can't seem to find a dealer that knows where to get one.

Looking for more traction on wet clay. What's involved in the switchover? (size of wheels, tires, spacers, etc.)

My tractor wouldn't restart after running fine a few minutes earlier. Checked fuses, etc, then determined that the fuel shutoff solenoid has a bad "pull" side, although the "hold" side still works. I can run the tractor if I pull the solenoid, turn the key on, then manually retract the shaft...

Short story version: 2013 HST w/200 hrs / owned since new with 0 problems/ serviced regularly Been having problems with fuel shutoff solenoid not engaging with key on. Previously, turning key off and on a few times engaged the solenoid. Battery died when I forgot and left the key on overnight...

The pivot brackets near the bucket of the KL130 loader on my CK35 HST snapped today. This thing only has about 95 hrs, June 2013 purchase. Anyone else have this problem? Are there any beefier replacements available? It looks like they're easy to replace if I can find some. Thanks..... I...

Found it on the schematic but can't locate it in real life. Anyone know where it is and which type of fuse they use? Gracias!

I need the traction in clay and I've been told by the local tire dealer that I must change wheels to change the tires from industrials to ags. Has anyone else done this recently?

Encountered a hydraulic problem when a branch caught the fluid return pipe (the short one from the engine area heading back) and bent it causing a loss of fluid on my 2003 with just under 200 hrs. that I've had since new. Got it back into position and jury-rigged new hoses because the old ones...

5 yo tractor w/180 hrs. No problems w/high gear in the past but now I cannot move shifter into high no matter what I do w/clutch or engine. Low works fine but sometimes requires synchronizing to engage from neutral. 4x4 linkage bar is missing (on order) but I have it in 4wd all the time...