Search results

Can I use these ports for power beyond for mid mount loader valves or do I have to add a block to the rear scv bank? 2011 with IVT and TLS

I am looking at putting a Mahindra loader on a 6430 premium Deere. Attached is a picture of the loader valve. Does anyone know anything about this valve? Is it closed center load sensing? I’d like to use it through the power beyond circuit. Cross Mfg 180206 DSVR172ACXYE011 HYD VALVE Thanks for...

2273001661

Our XU6168 Grammer seat is uncomfortable. The seat pad position is tilted forward too much for my liking. Wish there was adjustment for it. We can slide f/r, adjust weight, tilt back rest, adjust armrests, but that seat pad is just too uncomfortable. :mad:

Anyone mount a hydraulic pump setup to be driven by mid PTO? Have a friend with 790 wondering. Someone gave him a pump that was once on the front of an 8n Ford. He’d like to set it up to power a grapple or other attachments. Not really interested in power beyond or whatever Deere kits available...

WHY did they make such a wimpy setup for the FWA drive on the 3*20 series! Anyone know a fix besides replacing the pinion shaft?

Local dealer has Massey rotary mowers and I'm wondering about this models quality. Who makes these for them?

Had one of my students build a dolly for me. He did a great job using stuff from our scrap pile! 485/448 BH on a 3320

Some pics of my LEDs and heater. I got the LEDS on Ebay for under $40.00. 2-18 Watt slims on the front and an 18W round on the back. The heater is a $10.00 swap meet find and I used a vacuum cleaner hose I had laying around to put heat to the other side of my enclosure. The pictures don't really...

57M7166 part number shown on parts finder shows a H4 style bulb. Mine don't look anything lika an H4. Mine have an angled plug. What do I get to replace it? I may have to post a photo.

I have a 3320 with a 4000 series hitch (not A-frame style) for my SB59" Snowblower. Anyway to get this broom to attach to it?

I have a soft cab and heater for my 3320. Where can I plumb to the engine for the heater hoses? I see people using aeroquip quick-disconnects on the hoses. Wouldn't hydraulic connectors work just as well? I have lots of them laying around. Thanks for looking.

Does it go in a threaded plug hole? Size? Which side and where on engine? Does Kats or any other aftermarket have them? Not going to pay dealer JD price or $400.00 for them to install. Thanks for looking.

I have some 1/2" plate and am wanting to cut some parts to make a bolt on thumb for my 485 BH. Anyone have pics I could view to design them from? Will cut on my CNC plasma. Photos with a tape or yardstick on the part would be helpful. Thanks for looking.

I need to take out the black plastic operator station cover so I can repair my loader lever linkage. How does the orange cover on the range selector lever come off? Is it snapped on? I started to pry a little with a screwdriver and don't want to break it. Also, how to remove the rate of drop...

Blowing snow this evening and the SCV lever suddenly wouldn't move the SB59 blower chute to the right.(loader dump) The lever moved really easy like the linkage let loose. It would move the chute left (loader bucket curl) I believe something let loose in the linkage. Do I need to remove the...

Anyone turbocharge a 3320 engine? Does Yanmar make a turbo 3TNV88?

Anyone know the GPM and pressure available through the 3320 power beyond?

Has anyone made a tree pruner that fits on their FEL?

I'm trying to come up with a sod cutter that would quickly attach to an 18" bucket and peel the sod on 36 x 96" graves. Only found one patent Sod cutter - Hoke, Clyde Rockwell from 1977 online and it's far too complex for what I want to make. Would a sharpened 1/2" bar pull through sod? Or...

I see 2 plugs on the Left side. Put it in the front or back one? I bought a 1" NPT heater for $27.00 Looks just like the Deere and Zerostart models.

Just got a 485 backhoe and would like to build a dolly for it. I've seen the smaller hoes dollys on here but haven't seen one for the bigger series. Any pictures, links, help, direction, advice appreciated. Thanks for looking!

Does anyone know or have the measurements of the attachment points/ears for the 447 buckets. Hole ID Hole center to center. Ear spacing inside and outside?

Will truck 15-19.5 chains fit 15-19.5 R4s? I'm looking at these for my 3320 Deere. http://www.tirechainsupply.com/product202.html A buddy from a distance away got them from this site for a truck and then got rid of the truck. I can have them for shipping or a visit to my Bud's.

Which portable battery packs have the best durability and bang for the buck? where the best source to get one?

First I've seen this. Is it an aftermarket kit?

Do any of the 4*10 series brackets for backhoes fit the 3*20 series. For example: a 447 from a 4210 to a 3320? It would be nice for someone knowledgeable to come up with an interchange chart. Do the 3*20 series use the same rear housing as the 4*10 series? thanks for looking.

Anyone know how to fix the seal on a AM126765 hydraulic cylinder? Fits 47/59" snow blower

I saw the seal leaking the last use of the year. Anyone know how to replace the seal? Chute rotator cylinder. 59" snowblower.

Somehow picked up a 5" rock and broke the yoke to the worm drive. I'm pretty sure I can press and weld the yoke. But I need to find the cross-bearing to mate it back to the other yoke. I don't want to pay $185.00 for part #AM38891. Does anyone know of a cross & bearing that would fit? maybe the...

I bought this snowblower for my 3320 because the mounts looked like they'd bolt right up. THEY DID! The holes in my frame matched the holes on the bracket from a 4000 series?

Can anyone describe how to change the front wheel seal on my 3320? Wrapped a round bale twine around it. Caught it after only three revolutions, but it took out the seal. Too tight of space in that area. Poor design. I'll pull the assembly off tomorrow. Guessing I'll need to press a bearing...

A stick caught and pulled the connectors out of the plug. Need to know which way the three wires from the main harness match the 3 from the sensor pigtail. Wiring diagram online anywhere?

Need brackets to weld on to bale spear for my loader. What's the part number and current price?

3320 Mid PTO. How much for the kit? part/kit number to order? Current pricing? How long to put in? Can anyone email me the instructions to put it in? Thanks.

I'm looking for a place to get couplers to build a CUSTOM LENGTH PTO shaft to fit my 3320 JD mid-PTO. Are these 1"-15 SPLINE?

Does anyone know the diameter and number of splines coming off the 3*20 series mid-PTO? Is there a supplier that can provide the couplers to make a driveshaft? I have project I'm looking into. Don't have my Mid-PTO on yet but need to look for driveshaft parts. Thanks.

I have a couple Peterson halogen 3x 5 work lights to mount on my ROPS Wht color and where are the terminals the factory kit would plug to? Any online wiring diagrams for these tractors?