Search results

(this isn't the exact machine we're looking at - just a similar one online I found for illustration) When I was at the dealer the other day I did question the wheels and how to get wheel weights on there. We didn't have time to dig in to it then as we both had to go. What I did notice right...

All, We're narrowing things down on our tractor search to the LX2620. A few things to discuss - the rest of the options. We have been quoted a Land Pride SCG0660 grapple. I admit, I have not studied them. When I asked for a grapple I was half way imagining a bucket with grapple. However, I...

Mods - please delete the other thread in Snow Removal. Im guessing its in the wrong place = 0 replies. All, We're working through the set up of a compact utility tractor. No matter what way we go, it would have a loader and 3ord function hydraulics - specifically for this application and a few...

Can anyone with real world experience on either the B2601 with 60" deck or LX2620 with 72" deck comment on what they think of the process to install/remove the deck? Our dealer is telling us that even though they claim to be "drive over" decks that installing them from the sides is better...

All, We're working through the set up of a compact utility tractor. No matter what way we go, it would have a loader and 3ord function hydraulics - specifically for this application and a few others. We've looked at some purpose-built snow blade loader attachments and as nice as they would be...

We're looking at getting a ~25hp CUT (B2601 and LX2620 are the top of the list). Tasks will be general property maintenance - mowing, brush hogging, snow removal, material loading, logging, rear blade work. However, we are probably going to down sizd our tillage to run with the smaller...

All, Is there a nicer, ergonomic joystick available anyone has upgraded their Kubota CUT with for the loader controls? Im looking at getting one and the upgrade to 3ord function on the loader replaces the stick that goes under the seat with one that is loader frame mounted and has a plastic...

All, We're in need of a machine. Some background - we bought an old International 444 with a loader a couple years ago. I got it running when we moved out to our farm. It went down that winter a few months later and life's been too busy to do anything with it. I am hoping to get to it this...

Hi. We're looking at tractor options and I'm curious if anyone knows if a backhoe attachment is available for the M4? We ended up with an International 444 loader tractor earlier (42hp machine, 2wd), however at the time we were considering an LX3520HSDC. After running the 444 it is apparent we...

All, Is there an online parts look up that I might be able to search for parts on for a 185 hydro? I believe it is a 1987 model. The electric PTO clutch is out. I've done some initial diagnostics and have narrowed it down to the clutch. I have not removed it, so it is conceivable there is a...

All, This disk is available (as of right now) within a somewhat reasonable distance. See linked thread for more background detail. https://www.tractorbynet.com/forums/threads/disk-discussion-what-is-adequate-what-is-too-much.505140/ In short, 42hp International 444 2wd gas. At 5hp/ft - 8' of...

We're getting going on our first acreage. I won't re-hash everything here, see following link for some info on the process of getting our tractor going. https://www.tractorbynet.com/forums/threads/international-444-1968-progress-thread-getting-going.478847/ The tractor is a 1968 International...

All, I am looking in to various grains to grow on the farm. These would be primarily for milling down to flour to bake with. Down the road we may have 1/2 to 1 acre of different types. I am hoping next year we can plant some in small plots to experiment and see how it does here - that I think...

What are some of you using for low pressure fuel pumps? I'd also be curious if there are any thoughts of a burn rate for an old 42hp engine - gasoline. This would be good to have for sizing the pump (too low of flow and the engine will starve). Tractor is a 1968 International 444. I am...

For quick reference here are a couple other related threads: Pre-purchase - International 444 gas - been sitting for years. Trailering - Trailer rails are 76" apart, tractor with wheels is 82" wide - take wheels off? We just bought a 1968 International 444. For some of the details on condition...

Edit 7/28/24 - disregard. We got the machine home. If the thread stays consider it historical reference. Does anyone know how to find the dimensions and bolt pattern of the rear wheels on a 444 and similar machine (several series/models should share the same pattern)?

That is the conundrum - tractor + wheels is 6" wider than the width of the rails on my trailer. I had the wheels measured to see if we can flip them around and by the time we do that it only looks like we'll gain an inch or so - not enough. So the next option is to take the wheels off. The...

All, I am looking at an International 444, gas engine, with a loader to try and get something going on a machine for not a whole lot of $. That sounds like quite the risk, I know. Ive got a lead on one that isnt running. Im pretty good with the fuel and electrical systems. I think I can...

We're looking at getting the LX3520HSDC Deluxe Cab machine. I am curious if anyone here has any field experience with one, or owns one themselves? Something I am curious on is the "suspension seat". It is not listed as "air ride", but is "adjustable". Can anyone offer any thoughts on how it...

All, I am working through options on an LX3520HSDC (deluxe cab version, not the SU cab) and am curious what thoughts everyone has on tires. I am not sure I like the R14's. My thoughts right now are to lean towards the R4's, however I have a tangent thought on those - see below. We will be...