New Holland TC45DA hour meter repair/replacement

   / New Holland TC45DA hour meter repair/replacement #1  

VOL54

Member
Joined
Oct 11, 2014
Messages
46
Location
NW Tennessee
Tractor
New Holland TC45DA, John Deere 345
My TC45DA hour meter recently died. I'm assuming that the bottom access panel below the steering wheel would have to be removed to access the meter. Hopefully the upper panel containing the meter would not have to be removed. Until I can access the meter, I don't know if I have a bad/corroded connection or a bad meter. Any way to test this analog meter? Any thoughts or comparable experiences on this? Thanks.
 
   / New Holland TC45DA hour meter repair/replacement #2  
Your tach is electrically driven from a wire from the rear of the alternator. Refer to this thread for more information.
 
   / New Holland TC45DA hour meter repair/replacement #3  
Had the same issue on my TC45DA a while back — turned out to be a corroded connection behind the lower panel, so you're on the right track starting there. I didn’t have to remove the upper panel, thankfully.
 

Tractor & Equipment Auctions

HYD LIVE STOCK FEEDER (A54756)
HYD LIVE STOCK...
Craftsman ZTL 7000 Mower 42in mowing deck Parts/Project (A55301)
Craftsman ZTL 7000...
40' CONTAINER (A54757)
40' CONTAINER (A54757)
2018 FORD F-550XL SERVICE TRUCK (A51406)
2018 FORD F-550XL...
2018 TAKEUCHI TL12V2 SKID STEER (A52705)
2018 TAKEUCHI...
2011 Ford F450 Diesel with Just 156638 Miles (A55302)
2011 Ford F450...
 
Top