NX4510HST Seat Replacement

   / NX4510HST Seat Replacement #1  

JimR

Elite Member
Joined
Mar 11, 2004
Messages
3,598
Location
Central Ma.
Tractor
Kioti NX4510HST
If you ever price a new seat cushion for your Kioti tractor you will cringe. New Kioti cushions are over $600. I replaced my bottom cushion 2 years ago. It already has cracked in several places. This time around I said screw it and bought a folding seat with armrests from Vevor for $120 shipped. The mounting brackets are adjustable on the width and plenty of holes front to back. It also has armrests and a seatbelt. Plus the backrest is adjustable. The seat is adjustable and can be slid off the tracks to remove it. I can buy 5 of these seats for the replacement costs of one set of Kioti cushions.
 

Attachments

  • 20250629_165645.jpg
    20250629_165645.jpg
    4.7 MB · Views: 24
Last edited:
   / NX4510HST Seat Replacement #2  
If you ever price a new seat cushion for your Kioti tractor you will cringe. New Kioti cushions are over $600. I replaced my bottom cushion 2 years ago. It already has cracked in several places. This time around I said screw it and bought a folding seat with armrests from Vevor for $120 shipped. The mounting brackets are adjustable on the width and plenty of holes front to back. It also has armrests and a seatbelt. Plus the backrest is adjustable. The seat is adjustable and can be slid off the tracks to remove it. I can buy 5 of these seats for the replacement costs of one set of Kioti cushions.

In an unpublished video from back in 2018, I tried to shoehorn in a proper Sears air seat into my NX that is used in piles of different Case and JD et el tractors. I made new brackets to make the seat level and to sit as low as possible. Unfortunately, when I test fit the seat, it became obvious that I didn't have the headroom to be able to use the air suspension and so I put the stock seat back in. As I recall, the stock seat is weirdly built in that it's own suspension is difficult to remove from the seat itself. That said, if a guy can remove the seat pad, I suggest bringing it into an upholstery shop and have it recovered. A guy will need to remove the seat from the cab to do this by removing the four 12mm bolts and disconnecting the safety switch.

Last year, I replaced the worn-out seat in my Hough Payloader with this Vevor suspension seat that looks something like a much cheaper knock-off of a Grammer MSG65 suspension seat. From my experience, this same Vevor seat should (should, but I don't know for certain) be able to fit into an NX cab. That said, I suggest that a guy measure the stock seat height and compare it to the Vevor seat.



IMG_7482.JPG


IMG_5639.JPG


IMG_5640.JPG



IMG_2757.JPG
 
Last edited:

Tractor & Equipment Auctions

Quick Attach Pallet Forks (A47384)
Quick Attach...
2015 Chevrolet Express Passenger Bus (A50323)
2015 Chevrolet...
CATALOG IS A GUIDE ONLY!! (A50774)
CATALOG IS A GUIDE...
2017 Ram 5500 Valve Placer Bucket Truck with Versalift STP36NE - 41FT Working Height, Low Miles (A52128)
2017 Ram 5500...
2018 VOLVO VNL SLEEPER (A51222)
2018 VOLVO VNL...
2022 Ford F-550 Cab and Chassis Truck (A50323)
2022 Ford F-550...
 
Top