zzvyb6's latest activity

I don't believe you have the springs or rear tires to handle a gooseneck SAFELY. While it's possible for some 1/2-ton trucks to tow...

I am very familiar with a hub failure exactly like that: John Deere 14T baler hub. Plunger side.

I found front & rear R4s as new take offs on FB Marketplace from a golf course switching to turfs. There are currently 2 other ads for...

There's a gal mechanic on YouTube that recommends soaking the line spool with WD-40 after you load it.

What do you think of some sort of 'push-off feet' ? My stack wagons have various versions of 2 plates that extract the machinery. Could...

1) You haven't defined the bale size or weights expected. 2) Why folding ? Can't you just do a QA tine rack and pick up or drop off as...

Around here, a blue nozzle cover signifies gasoline. Green is used for diesel on a nozzle that is too large to insert into a gasoline...

In my humble experience, you should consider having TWO fuel dispensers because you are likely to be facing TWO empty tanks: the mower...

I've gone to 2 100 gal tanks with 12V pumps, each with built-in filter cartridges. I can't lift the 5 gallon containers comfortably any...

Made my own using an ancient PU truck plow. Yes I have the JD QA plates, but the skid steer plates are cheap, then just add some pins...

Yeah, I forgot about the loose needle brake issue. That's the real need. If the plunger gets stuck by the stops, that's a sound the...

The 4 place snowmobile trailer with that hay bundle and axle positions gave me about 60 lbs of tongue load. That'a about 1/2 a tank of...

Yep. That was me in my Y2K 'vette. Standard Draw-Tite bolt-on hitch was readily available. I was being passed on I-96 by a blond in a...

Switch the couplings so that curl and lift are swapped. Then see if lifting the loader arms is a problem and curl is now ok. That...

Back down the ground travel, windrow size, or sharpen the plunger and stationary knives. There is really no need to get a slip clutch...