Recent content by Yanmar186d

Hi nice ride on I have one and they are built like a little tank, I rebuilt the deck on mine and I have replaced the rear axle seals and apart from that its been great.

Not sure what the make is as it has no ID on it, I have some pics and one of the crack on the bell housing to.

Hi all, well I've been doing a bit of work on my tractor fully rebuilt the back hoe , new pins bushes cylinders welding cracks sandblast and 2k paint, new bucket on the loader, rebuilt front diff, rebuilt starter,new ignition switch, rebuilt steering box with new shaft,had the radiator rebuilt...

Hi i have just purchased a set of front tyres for my yanmar tractor, the tyre size is 6-12 but I noticed that I've been sold a tyre that is 6.00 12, I made a note to the guy and he said its the same tyre but they appear to be a taller tyre, can I run this tyre or will it cause me issues? Thanks...

Can anyone help? When I connect my battery to the terminals the dash lights come on with the key in the off position, when I start the engine they turn of. Another problem I have is when I turn the key the starter just clicks but won't turn the engine over, the only way to start it is by...

Hi to everyone, I'm replacing my brake shoes on the 186D and found one side had a lot of oil in there, I have removed the drum and found a plate there with 6 or so bolts and removed them, I noticed the plate has 2 threaded holes to put 2 bolts onto so to push the plate out but It's very tight...

Hi everyone, can anyone give me some help on removing the dash on this tractor? Is there a way to remove it or should I try and remove it with the panel that its attached to? I'm trying to remove the steering shaft and box. Cheers Daniel

Does anyone know how to undo the nut on the pulleys? I'm finding it hard to hold the pulley and try and break the nut free? Any thing I'm missing here? Thanks for any help.

Hi just a question in regards to the above mowers, which of these mowers is the better one to go for? I know the T1600 is a 2 cylinder and the G5200 is a 3 cylinder, which has the better HST or are they the same? Looking for any advice thanks. Cheers Daniel

Hi winston I fitted the strainer after cleaning, the hydraulics on the front end loader are working much better and the pump is sounding like its not working no were near as hard as it was so I'm very happy. I opened the tap under the seat counter clock wise as you said and the squeal has...

I have a 186D with front end loader it's plumbed into the rear as in the pic when I use the loader it makes a load humming noise like its starving for oil, when I engage the lever for the rear 3pt it squeals. I'm new to the tractor and don't know anything about tractors as this is my first...

Hi my names Daniel this is my first post on this great forum,I'm a new owner of a yanmar 186d tractor that I have just brought to use on my hobby acreage that me and my family hope to live on one day. It has a fel and a backhoe attachment and needs a fair bit of work to get it to my standard...