Recent content by Windy Hills Farm

Sorry for the delay. We had to wait to cut hay because of the weather. I put the new seals in and the hydraulics work great with no hissing sound. Thanks for all of the help.

Before I buy pressure gauges or a flow rater, I think I will try it out with the new seals (which have not come in yet) and clean suction screen, cutting hay next week if the weather permits. I will keep you posted when we cut hay.

Thanks for posting the diagram Tx Jim, I wanted a second opinion on which seals to replace, so from the part numbers on the diagram I ordered all of the o rings, valve spools and seats, and the two big rings that go on the rock shaft piston. I will pull the rock shaft housing which I have done...

Thanks rScotty. It could be an air leak. I will check for leaks on the hoses and fittings that I can access easily. I will also probably pull the suction screen back out because with how much shavings were on it, there could been more on the bottom of the reservoir and clogged the screen again.

Thank for responding. Can you post a diagram with the seals that you said are leaking? The loader is independent. The hyd filter and fluid are replaced every year. It has been probably been less than 100hrs. I just cleaned the suction screen. It had metal shards in it which I am assuming is from...

We have a John Deere 2355 loader tractor and the hydraulics work good when you first start it up but as the tractor gets hot after about 1 to 2 hours of use they get slower and slower until you can hardly use them. it has been like this for awhile but last time I used it the power steering...