Recent content by turboviking

If you are anywhere close to a shop, I recommend having it done. Doing it yourself will bring you a sense of satisfaction, and also much cussing. I also change motorcycle tires. Anything larger than a 21" / 90 profile I have done by a fellow with a machine. I don't cuss, and I am quite happy...

Hi, the spools were hard anodized and in good shape. They were in bad need of cleaning. I just buffed them with scotchbrite pad lightly.

They were stuck. The spring had corroded, probably due to moisture in the HYD fluid.

I have them on a phone that is not near. But I will try to post. HUGS - Troy

So it turns out that these can be disassembled. And the spring inside was toast. Corroded in half. Fixed. Not installed yet. We will report. HUGS all. Troy

They are apparently directional diverters. The spool, or plunger inside is stuck in the "in" position. I tried 150 PSI of air and even a small pick tool to move it. Seems frozen in place. Thanks sir!

It goes into a "diverter" valve body. That uses an electric solenoid to change from front to rear hydraulics. There are 4 of them Apparently two for bucket tilt, and two for bucket lift. Then they reverse and go to feed the top and the tilt cylinders, Oldnslo

Hi! This is a "Deere" LVA 12456. Trying to find one. Deere wants nearly $800. Does anyone know it there is a way to fix these? TIA Troy

HARDLY NEW... BUT :confused2:I have found my wit's end working on my tractor. The JD 4610 has factory installed rear HYD for top/tilt and apparently some attachment, (never used yet) and my problem is that when switched from front to rear or vice versa the tilt function (rear and top function)...

I have found my wit's end working on my tractor. The JD 4610 has factory installed rear HYD for top/tilt and apparently some attachment, (never used yet) and my problem is that when switched from front to rear or vice versa the tilt function (rear and top function) rear both work with the switch...

Hello! I have a JD 4610 with factory installed rear hydraulics - and it is switched electronically with a rocker switch on the right operator's console panel. Some time back a problem started that after mowing or doing work with the rear hydraulics only, the front wouldn't re-engage. It wants to...

Hello! I have a JD 4610 with factory installed rear hydraulics - and it is switched electronically with a rocker switch on the right operator's console panel. Some time back a problem started that after mowing or doing work with the rear hydraulics only, the front wouldn't re-engage. It wants to...

4610 compact. Had to replace the power steering and can not re-assembly the dash assembly - because either I am a moron, or this is the most poorly designed thing I've worked on. Anybody have any ideas? I have tried EVERYTHING and am about ready to start breaking things. The unit has two hoops...

Hello, I have a 2001 4610 4WD and noticed that hyd fluid was spilling out onto the footwell. I removed to the degree I can, the covers and the fluid is coming from the steering controller, or whatever it is called. I do not have manual for this. I can not get the cover off that has the tilt...