true temper's latest activity
-
Ttrue temper reacted to dieselscout80's post in the thread Starter fried? Newer Kubota BX 2380 with
Good Post.
Wonder if they ran it out of diesel and used the starter to get it going without bleeding the air out? -
Ttrue temper reacted to rebelback's post in the thread FEL Lift Capacity For Unloading Semi Trailer with Good Post.
I did a quick test tonight and was only able to lift 1400lbs of feed 3' off the ground. I'm going to do a pressure test to see if I'm...
-
Ttrue temper reacted to nyone's post in the thread Alternate Hydraulic Oil and Filter with Good Post.
It's a hydro drive machine. No way would I be putting diesel in the hyd oil. In fact since its hydro drive I would flush with the...
-
Ttrue temper reacted to nyone's post in the thread Alternate Hydraulic Oil and Filter with Good Post.
Does the machine have wet brakes or clutches? If so I would make sure you use NH fluid. I believe I paid $120 for 5gal of NH fluid...
-
Ttrue temper reacted to Too many Kubotas's post in the thread Alternate Hydraulic Oil and Filter with Good Post.
I would use some cheap fluid for a rinse, then use something recommended/approved for the actual fill.
-
TDo not add any stop leak products to the oil! It probably won't help anyway. They might help a leaky shaft seal by causing it to swell...
-
Ttrue temper reacted to mikester's post in the thread Dig septic bed with front end loader with Good Post.
Yes you can dig your septic bed with your 2650 and FEL! Make a time lapse video of the job! Post a video on you-tub. You will get rick...
-
Ttrue temper replied to the thread Briggs 44M777 Surging issues - Need help!.I know you put a new carburetor on it, but I have put a bunch of Chinese carburetors on and about 10% of them just don’t work good.
-
Ttrue temper reacted to ericm979's post in the thread This is probably a stupid question, but...... how do you unload a heavy implement from the truck? I do not have a front end loader. with Good Post.
You can get a boom for the three point hitch: https://www.agrisupply.com/boom-pole-500-1000-lb-capacity/p/103831/
-
TI sharpen the blades on my 3 spindle ZT deck. I have a dedicated 2" wide belt grinder that I use for knife making so it makes quick work...
-
TThat distributor is known as a Delco conversion. Your tractor more than likely came out with a magneto, and a PO converted it to a...
-
Ttrue temper reacted to hosspuller's post in the thread Fiberglass rebar for garden stakes? with Good Post.
The sun will degrade the pink coating... Then you'll get a handful of glass fibers from the bloom. No thanks...