TractorNoob85's latest activity

@BackRoad south central PA.

I'm no landscaper but water bars in a driveway sound like a pain to resurface. The driveway would never feel smooth. I do like the idea...

@anomad Speaking of the hard rains. Im in PA and we got hammered Wednesday evening with rain. This is what I had to clean up Thursday...

Rear tires are filled. I do keep the front loader and 72" bucket on for front weight. The DK doesn't have draft control. Only the knob...

I bought an 84" BB last year to use on my driveway. Its 1500ft gravel and on a hill. Gravel will wash on very hard rains and needs...

There is a reason why every hay mower or green forage chopper are offset or front mounted. Once a tire rolls over something it is going...

Higher settings make for a lesser quality cut in my experience. My flail cuts what I consider acceptable beginning at about 3", which I...

I think mowing in general is very much like snow plowing... A whole lot of variables that affect the outcome. I find that the higher my...

I can attest that 2" will leave a better finish than 3". I've tried running 3" and it leaves a stripe of partially cut grass from what...

You will not have a good cut of the grass and brush simply because the flail mower will not create the pressure gradient/suction needed...

I use a 7ft box blade behind my 45hp tractor. It pulls it great downhill or on flat but if going uphill, it'll stop the tractor and spin...

Betstco says that but it doesn't really do it. I have the same mower as Scootr. With the roller set all the way down, the height is 3.5"...

I used to burn brush piles. Later I chipped them. Now I pile brush in selected places, leave it alone, and get to watch more wildlife...

It'll splinter and spread the wood out more than it will grind it up. At a certain point, you would be better off with a wood chipper or...

Just order a LandPride FM2584 with duckfoot blades for use behind my L6060 for mowing my horse pasture. Use a BushHog 1812 batwing and...