Recent content by Todd8665

Well... Finally got around to doing the repair. For once, unless I'm being fooled, I got lucky. I removed the AC compressor and bracket, overflow and washer fluid tanks, and various other small things. I was pondering if the injection pump would have to be removed 😓 to remove the intake...

Yep. In hand

MIke. Yep, thanks- I ordered all three.

Thanks. I figured it was pretty light.

Warning - I am not necessarily in a hurry to do/attempt this repair so this may take a while. I noticed a drip coming from the tractor and determined that it was diesel. Further inspection led me to the injector nozzle area as the source. Sprayed each nozzle down with brake parts cleaner and...

Thanks Clemsonfor....but im not there yet. Recap: I blew the bottom out of the bolt on steering kit. I purchased the rebuild kit, includes steering shaft, to rebuild my original steering box. (Side note. The aftermarket steering box is quite different than the original) I am hoping...

One more pic

Little JB weld otta do the trick... I shoulda just bought the bearings and seals used my old gear box.

Went to neighbors to move a little dirt. Wound out over turning wheels and busting the steering box. Drove home (1/4-1/3 mile) using the brakes and a few manual adjustments to keep straight. Got home to find oil pouring from bell housing! What have I done..!

Well...might need a different pressure relief. Scratching a hole with the bucket for some rasberries. It didnt happen at first. But I noticed that now i am blowing oil out pressure release every time i dump the bucket. Im going to buy a pressure gauge so i can see what im working with...

Hi all...Been a long time since I showed my face here. Quick post on hydraulic line replacement. The hoses from my loader valve to the splices in the factory steel lines were starting to go, and I am anticipating that I'm going to need a clutch soon and wanted to facilitate splitting the...

Sorry to muddy the waters, and I hope this doesn't come out like a manifesto... I live just on the edge of one of Lake Superiors lake effect bands so i get snow, lots of snow. I can count on getting pounded a few times a year with anywhere from one to three feet in as many days. I can also...

Plan on having my starter rebuilt; now that spring is coming... There seems to be considerable slop/play in my 19 mm box end wrench on the starter bolts. Anyone else run into that?

To the regular reader crowd - I have eluded to a issue I was having shifting..perhaps even eluded to shifting into either 3rd or 4th on my gearshift. This post is both a request on possible fixes and an explanation to my particular 'work around'/not quite fix to the issue. I've had a...

Winter has been pretty gentle to me thus far this year. I've used the blower only once, back bladed the rest. There's a hill in one part of my drive that for the first time ever I've been able to blow going up!:dance1: I've also been impressed in a couple spots along the road where i push the...