TMGT's latest activity

That's common due to the leverage on the cylinder, unless you have a lock valve. Are you running it vertical? If you're just using it...

Do you mean the tilt function? Unless you have a lock valve on the cylinder, you will get some leakdown. How are you using your mower...

I run a 78" on a similar size/weight tractor, a Kubota L3240 with loaded R4's and a loader. I had a very steep road of milling in front...

Was able to get a little shop time in today, welded up the shank and mount. Had a little trouble getting the welder dialed in for the...

When I was hauling cars, there was a Wendy's near my local auction that I was able to take my truck and trailer through. F550 with a...

Machining is done, now I just have to weld it up. My work schedule isn't allowing me as much shop time as I'd like, hopefully I can...

It does, I still have some finishing touches, but I built one for it earlier this year.

More like just over 7gal, but he said it was a gal low, so closer 6gal. Without knowing compatability of the fluids its a gamble, it...

Is it a gear or HST? If gear, I probably wouldn't worry about it. If it's an HST, I would change the fluid out if it was my personal...

Thank you

Thanks, and I know. If you're going to call someone out on misspelling one word, you should probably proofread your own post first!

Thanks for the heads up, I corrected it. My phone kept insisting on changing laminated to lamented for some reason. Thought I corrected...

Was able to get all the mounting parts cut out, all 1/2" except for the spacers for the bushings which is 3/4". Not shown is the peice...

It's a Kubota M4711, which is a rebranded Bradco 611. The holes are to allow me to weld the 2 outer layers to the middle layer besides...

Had this project on the list since I got the backhoe a few years ago, finally got around to actually making it. I had been playing with...