TMGT's latest activity

I just use velcro for strap management, you can buy a 60ft roll of 3/4" for about $13. It's reusable, works for storage and excess strap...

The adjustment is behind the left rear wheel, i just had to do it to my 2680 when I added the deck. There's lots of videos and info on...

Have to disagree about the Vulcan cart, I have one I use for my XMT 304 with a 24a feeder. My only complaint is the tank holder is too...

I only use the G6 for leaf cleanup. They were well for breaking up dry leaves for the collector, but they do like to blow out the front...

I wouldn't recommend closing off the discharge with the G6. They aren't really made for enclosed mulching and, depending on grass type...

Really shouldn't run steel wire in your aluminum liner, the steel wire can be pretty dirty and leave contamination in the liner, which...

I've run into sae thread fittings on some Kubota loaders since a lot are made in the US, I've had some tractor mounted fittings be...

I assume you mean a L3540? Are the fittings on the tractor or an attachment like the loader or backhoe?

I always hated using zip ties for the ends, switched over to metal crimp cramps a few years ago. Look much more professional and less...

The outer layer on most hyd hoses is marginal at best on UV, some of the more expensive options are better, but I still see a lot of...

Scotty, I don't believe the relief in the priority valve is another relief not listed. Going from memory, the priority valve is made...

And don't forget the pto circuit after the steering but before the filter and hst charge circuit, each with their own pressure relief valve!

We're getting soaked here, the other day we got almost 4in in just over 1hr. I need it to dry out enough so I can mow before it gets...

It's worth doing, I had a hose blow on the loader a few years ago, worst possible time and made a huge mess. Hose didn't look that bad...

The charge lines pressure relief or the main loader/3pt relief? See item 3 on the diagram Scotty provided earlier.