On my 2015 GR2120 mower the bevel gearbox locked up. Took it apart and found it was empty of oil and had a destroyed bearing. Gears themselves still looked OK so bought all new bearings, seals and parts from Kubota to repair it myself. Approx $100 with some RTV as well. Manual calls for...
Last year I bought a 2014 GR2120 used, 400hrs, and it came with the 54" wide 3 bladed mower deck. Since I mow mostly narrow paths in very high grass I think the 48" deck would work better for me. If anyone in the northeast US area has the stock 48" deck made for this machine and would want to...
I recently purchased a GR2120 with the 54" deck and find that it does not cut the high grass as well as my old bottom of the line 48" JD lawn tractor. By high grass, I mean 1-2+ feet high. I think the issue may be due to the baffles. Between the smaller blades allowing a shorter deck, and...
I have seen people with GR machines list GR2728, GR2707 and I think a few others. Does anyone know what the differences are? Do the numbers mean anything? I will be possibly getting a used GR2120 this weekend and want to see if I can find a used snowblower for it over the next few months...
In doing some research around the site here I was looking into getting the GR2120 lawn tractor for mowing around some hilly terrain. I had read about a fair number of issues with some Kubota model lawn tractors and (Glide steer and quality)but most of my research was a while ago I do not have a...
Last year I put a hydraulic thumb on my L35. I ordered the valve and hoses from Surplus center. Last week I was using the thumb a lot on some heavy rocks and noticed one of the hoses was leaking. Not at a wear point or fitting but just seeping out of the hose midway along its length. There...
First time trying to use the backhoe on the L35 after a long cold winter. Worked fine when I put it away. Did use the tractor to move snow in the winter but did not use the backhoe, although it did remain attached. All the other backhoe functions work fine and seem to have the proper strength...
I just installed a new hydraulic thumb on my L35 and still have to add in the hydraulic control valve and hoses. In looking at the valve bank for the backhoe I do see that there is a plug on the bottom of the first section. This is the section with the hydraulic feed and return lines. Does...
Adding a hydraulic thumb to L35 and there is an option for 21" length or 24" or 30". Anyone know the length of the stock 12" wide bucket on this machine? Or what length thumb would be best?
Thanks,
Steve
I finally decided to go ahead and buy a hydraulic thumb for my L35. I'm in the Catskills and there is just so much rock all puzzled together it would be great to be able to pinch down on a big flat rock and slide it up out of the clay like pulling bread from a toaster rather than digging all...
Posted this in the wrong section so re-posting here, sorry for the double post.
I'm mounting chains on my kubota L35. On the fronts I finally got them mounted up nice and tight and even but then I noticed that if I turn the wheel all the way the chains rub on the tie rod. Is the solution "just...
I'm mounting chains on my Kubota L35. On the fronts I finally got them mounted up nice and tight and even but then I noticed that if I turn the wheel all the way the chains rub on the tie rod. Is the solution "just don't turn all the way" or is that likely to cause a problem? I have already...
About to pull the trigger on a metal garage as I need to get something in for my new L35 before the winter and that seems to be the most cost effective and I'm running out of time. Can anyone confirm if this machine will fit through an 8' high door? Searching around it looks to be spec'd at 94"...
Anyone know how where to buy the optional hitch for an L35TLB or what the kubota part number would be? (or aftermarket) I could not find it on the kubota parts lookup site. Looks like it is 2" reciever style that mounts under the rear axle transmission. In the manual it is listed as optional...
I need to pull a large tree that fell over a stream. I have cut it a bit but there are some areas I can't get to with the chainsaw. I have a 5/16 Grade 70 chain. Where is the best place to attach a chain to an L35 to pull from? It does not have the optional hitch. I would like to know a...