Recent content by Tandem

You are right. I was obviously not paying much attention when I copied the text I received from the local distributor.

According to Bobcat the belt is 35inch (889mm), but it does not say if that is inside or outside diameter.

Can someone know the correct specifications/dimensions of alternator belt for Bobcat 463 (Part Number: 6719549) ? Bobcat S/N: 520011576 Unfortunately I am not able to take any measurements of the old belt as it is completely shredded. Ordering an original Bobcat belt from the states would be...

Sorry for the late reply. At the end I ended up using the vinyl line supplied with the screen. Just had to heat it up in order to straighten it first.

I am about to replace a fuel pickup tube that broke off due to deterioration. This seems to be a common problem with Bobcats. Why are these tubes made of vinyl? Is it a bad idea to use rubber fuel line instead?

I just removed the PowerSafe filter from Pasquali XB40 (BCS 740) and found few pieces of rubber sticking out of the filter holes. Any ideas what these chunks of rubber could be?

The tongue on my trailer is quite low so I had to make a different type of adapter to make up the height difference and connect to the BCS Curved Coupler (92247720).

Thanks for the kind comments. If you look closer you would see that my welds are not that nice. The trickiest part was to weld the bar square and centre to the hub plate and align the bolt holes. I was not comfortable putting that much force onto those tiny wheel bolts, also the extra plates...

Anyone using any kind of Bramble Bar (Bar Guard) on their mover, do you find it very useful? Berta sells one for their flail movers. In the mover manual they refer to it as Tubular Anti-Hooking Device for Brambles and Shrubs. Too much trouble to source one so I made one from rebar. Works okay...

Thanks for all the suggestions. Yes, the Earth Tools Wheel Weight Hangers is the best solution and I would definitely buy them if I was in the US. Did not make much sense to have something like that shipped overseas so I put this together and it works great. Getting the right weights to fit...

BCS Curved Coupler (92247720) Thank you for the detailed tips and suggestions Jens, very helpful. My primary use is mowing and pulling a trailer. Ground clearance has not been an issue for me so far with the 5.0-10 wheels, but I will have to think about improving traction when puling the...

Ready for work.

Berta 65cm survived without a scratch.

This is a followup to the Ferrari 340 (BCS 740) vs. Grillo G 110 post. I finally received the Pasquali XB40, aka BCS 740 or Ferrari 340 and wanted to share some photos. Since the shipment arrived in pretty bad shape I took more pictures than originally intended, so if anyone wants to see...

Hello TBN members. First of all I would like to thank the Chishti family and the IMC Digital Universe staff for starting and maintaining this great resource. Most people are not aware of how much time and effort goes into running a forum website. Also, thanks to the many members that...