Recent content by srodenny

Ok, I see they have a 12 spline also.

Ok, thanks for the help. I’ll start there.

Picture of blade assembly

5’ mower blades - 25”x3”x1/2” . Bar is 16”x4”x 1/2”

Should be L36

Yes, the numbers on both blades - H36 H. 6. 17. SP

Trying to determine make and model of this cutter. It was originally red and I thought it was a Bush Hog. But couldn’t find it on their website. I need a blade bar (a lil bent) and flange nut. I purchased a M30x2 nut, but it was too big . The shaft appears to be 1”. Any help would be appreciated.

After I removed the power steering cylinder bracket under the engine, I attempted to remove the cylinder from the tire side. After I removed the top nut, I realized there was a nut on the bottom. I turned the bottom nut and the top bolt would turn, but no progress in it coming out. Do I need...

Purchased a 1720 4WD two years ago. Three weeks ago, I was bush hogging some fields for about 7 hours. The tractor was running fine and the temp never got to the red indicator nor did any warning lights come on, even though I could feel the heat from the engine. I was going through some high...