If you look at the owners manual, page 28, reduction box assembly. the sprocket keeps backing off. I have reset the allen set screw as tight as I can but it's not holding. Its done it 3 times in a row. bit of a PITA with this snow storm...
So I know one of you guys will know why it keeps...
I just had a new garage built, and the question is epoxy or a sealer? I live in Central New York, so snow, freezing temps, and lots of road salt will be applied almost daily to whatever I put down.
Thank you for your input and suggestions.
Mike
I broke a LH shear pin on the blower (my left hand), and like others I have noticed a gap on the side of the auger and the bearing flange. The only way I could find the broken pin, was to remove the 3 bolts that hold the bearing flange on the left hand side and move the bearing flange to the...
My first power steering hose failure was @ 160 hours, hoses were replaced free of charge by my dealer under warranty. My second power steering hose failure was @ 224 hours. So I did a search on this site and found several people all having the same problem. So rather then call or drive 30...
Hoping I have this in the correct forum. I have a BX2200 and I have a front mounted snowblower off of an old Ariens GT17. The blower is 48" and worked great on the Ariens. I am thinking about hooking this up to the 3pt hitch, less $$$. However I have questions, do I need to worry about RPM...