Rustyiron's latest activity
-
Rustyiron reacted to matthew.maxwell2's post in the thread Leveling Modern Ag Batwing with
Good Post.
General update. Again, thanks for all the ideas and suggestions. What a great community to be a part of. I feel like the whole group is... -
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
We have rain returning Monday, so may be back doing some cutting. I moved the 7495 & double mower to the next mowing location.
-
Rustyiron replied to the thread Mowing Cutter death trap.While you're at it, there's a lot more driveline and gearboxes to inspect and lubricate that can be very expensive if neglected. 👍
-
Had this project on the list since I got the backhoe a few years ago, finally got around to actually making it. I had been playing with...
-
Rustyiron replied to the thread Lifting Bars - What Gauge/Thickness?.1/8" wall is not enough. Do you plan on using these lifting bars with that lift you pictured? Balancing 77" on top of a 53" support...
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Got a short window of hot, sunny weather. So quick as I could, I raked & baled about 18 tons of rained on hay. I’m working alone cause...
-
I'm no expert but I've had very good luck with the posts I've set. Even though they are treated, I've coated the below ground portion of...
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
I started cutting a field Monday morning, when a “20% chance of thunderstorms” turned into 20 hours of rain and thunderstorms on Monday...
-
Rustyiron replied to the thread Where TF does Ford and RAM list all their equipment packages for their trucks?.I think that's for the trucks equipped with an 120v inverter.
-
Rustyiron replied to the thread Where TF does Ford and RAM list all their equipment packages for their trucks?.It is confusing if you're not a "fanboy" and into the gadgets. I'd start research by GVW Cab/bed requirements Gas/diesel (if...
-
Rustyiron reacted to Carl_NH's post in the thread Barndominium/Shop or "real" House? with Good Post.
Looks really good - nice, clean installation!
-
Rustyiron reacted to ETD66SS's post in the thread Barndominium/Shop or "real" House? with Good Post.
I'm ready to start running my pex: Used one of those foam heat knives to take off some nubs where the manifold will be located.
-
Rustyiron reacted to Carl_NH's post in the thread Barndominium/Shop or "real" House? with Good Post.
Agree with you LBBJ - thru the wall for the line sets and usually a electrical disconnect box next to the compressor. As far as the air...
-
Rustyiron reacted to WinterDeere's post in the thread Barndominium/Shop or "real" House? with Good Post.
Agreed. PEX is cheap, install it now, as a separate loop. No one says you need to connect it, just install it.
-
Rustyiron replied to the thread Makita 18volt battery string review.About a year ago, in a moment of weakness I ordered a pair of "counterfeit" batteries. It was a self inflicted "I told you so"🤪 Junk!