RjCorazza's latest activity

I would think it would be easier to remove the hydraulic line than to remove the pump from the shaft. No direct experience though. On an...

My ssqa plow has some slop built in that once the blade weight is on the ground, the fel weight is not. No problems riding up, and I...

My rear discharge 84" mower will windrow high and/or wet grass. Try swapping out the blades to a higher lift type, cutting only dry...

From: https://www.stihlproline.ca/en/tech-corner/stihl-trimmer-heads-and-line "STIHL premium line will absorb 5% of its own weight in...

Supposedly, soaking/ storing trimmer line in water reduces line breaking. I personally don't see how that's possible and I don't do it...

After you perform the steps above, remove and clean the high amperage connections at the battery, frame, and starter.

I have a mix of can types, but like the No-Spill cans the best. I have used their 2.5g can for at least 10 years for my 2 cycle fuel...

I've never seen white powdery residue in my strainer. I use a MrFunnel for known contaminated or suspect fuel on rare occasion, and plan...

I have chains, but my customer base would not tolerate the chain marks on pavement. A big selling point for me is UHMW Polyethylene plow...

... Also list any steps you have taken to potentially fix the problem, like replacing the fuel filter(s), etc.

Sounds like a plan. You have a good understanding of 3 point ballast vs loaded tires, which occasionally gets argued here on TBN. I...

I would agree that 1000 lbs would be a good starting point, along with the 55 gallons of fluid in the tires. I like having the loaded...

Definitely scam pricing. Kudos on all the avenues of investigation! Apparently scammers use the same web site design, as they all look...

That was my take also, but I wasn't sure what the term would be. My blade "tilts" left and right a few inches, but not operator...

There is SIGNIFICANTLY greater risk of twisting Loader arms while using a bucket and catching the corner on something. A plow generally...