RjCorazza's latest activity

Uhmmmm.... I like that idea!

I have a 3 point spreader that I have yet to use on my cab tractor. In the same boat as far as activating the gate. I am thinking either...

I plow with an HLA 2000 7' SSQA blade, and it works great. I do around 15-20 long residential drives in my immediate area. I can see...

Doesn't have to be big... My Kubota ZD mowers have 21 grease points each. The electric grease gun with LockNLube tip really helps. On...

There is something oddly satisfying in obliterating stumps with a grinder!

I certainly agree that Del Morino is over priced, but it is a known quality. I just don't want the hassle of repairing a flail...

If you're doing legit ditches on otherwise flat ground the flail should be able to be rolling on the ground most of the time. I cut a...

I think tractor weight is the most important factor when considering a ditch bank flail. When that mower is hanging out fully extended...

My 72" zero will do that when the front gauge wheels are worn down, but while turning on uneven terrain.

The first thing I did is remove the belt covers on my ZD mowers. Grass packs up in there, and it's a pain to remove them each time I...

With those hours and implements I would imagine it's worth around $15k

I put Amsoil 75w110 in my past two front axles, and use 75w140 in all of my gear boxes. Most of the gear boxes get changed on a very...

When young, my dad insisted I grease his equipment until 100% clean grease came out. We went through a WHOLE LOT of grease! I have...

Hedges and general vertical mowing were also a secondary consideration for me when I got a ditch bank flail. I guess it all depends on...

I use semi disposable gloves, in the 8-9 mil thickness range. I usually give the grease gun a quick wipe down after I'm done.