RjCorazza's latest activity

Glad you are enjoying the zd326. It's a great mower. As far as closing and opening the chute, it will likely leave windrows of...

The rocker is OEM, and I believe the power switch is left up to the dealer (?). In any case, my installation does not use a house...

Looks like you'll need the serial number for at least the hst type B7100. As sandman2234 states, Kubota doesn't really use model years.

Sounds like you received everything. Should have the toplink also. I would have to see the 3rd function switch, mine was a rocker switch...

Could be the key switch, but more likely resistance in the numerous safety switches or resistance in the high amp cables (battery...

I would imagine the clunk you are hearing is the fuel shutoff solenoid. As far as not engaging the starter several times before...

I get between 500-600 hours on each set of 26x12-12 Grassmaster tires on my mowers, with zero failures. I run the tread off of them...

I think mowing in general is very much like snow plowing... A whole lot of variables that affect the outcome. I find that the higher my...

I blow out the radiator on my diesel mowers after each use with a battery leaf blower. This post reminds me that it's due for a more...

I back drag quite a bit with my machine..however it's never in virgin ground. Usualy I'm pulling the top down of a loose pile.

I have seen string replacements for rotary mowers, but I can't believe that they would last very long at all. Chains or cable would be...

Looks like asking prices are around $11k for similarly equipped 4110 tractors. With your tractor's low hours, I suspect it would sell at...

You can't beat the convenience of a commercial chute blocker. That said, if you're a good fabricator I see no reason why a similarly...

I personally would also drain, and possibly flush the tank depending on what comes out. I had a contaminated fuel issue last year in my...

Perhaps it's a self bleeding fuel system. My Kubota diesel mowers have (2) filters before the lift pump and one after. I bleed them by...