RjCorazza's latest activity

Even if you have loaded rear tires, you need something heavy on the rear 3pt to counterbalance that kind of load.

I checked the specs, and that ditch bank flail is 820 lbs. My 62" ditch bank flail weighs 707 lbs, and it's about all my L4060 (6450 lbs...

King Kutter implements are generally well made. I have a KK tiller that is built like a tank. It's relatively easy to assess the...

Not the same brand, but my Kubota requires that I be in the seat, engage the pto, get off the seat and raise the seat within a second or...

I think @ptsg is correct. It's #21 in the attached parts diagram that is labled "breather"

@Melancholy Bear Not familiar with your specific tractor, but the manual vaguely describes that the bleeder is on the filter or filter...

Nice setup. Nova was on my short list for a ditch bank flail, but I ended up with DelMorino.

Gauge wheels do make gravel and dirt work easier. I used a rake on my gravel driveway, and adding gauge wheels made it a two pass job.

Many chiropractors in my experience, blow smoke with their claims and assessments. That said, I had an amazing experience years ago...

Hopefully it will be that simple. I burned up one starter on a ZD mower years ago, but that was me over working it with a fuel problem...

Here's what I wrote down for my L4060, but I've never tried it : 1. Press Display mode button and hold 2. Turn Key to On 3. Several...

I quit running my small engines dry years ago. Seasonal and infrequently used engines get the fuel treated with Stabil run through the...

Looks like it's $200 from Kubota, or you could fabricate one with some coarse screen.

I also prefer the push button types over collared shafts. It hasn't come up yet, but a bunjee cord or rubber strap holding the shaft up...

I use Gator mulching blades year round. For fall leaf mulching, I have a chute blocker that I use in various mowing patterns to grind it...