Richard001's latest activity

That crankshaft is shot. These engines need oil in them to run for any length of time, plus you have to limit the RPM.

Welcome to TBN You may get a better response if you posted in the Cub Cadet form: https://www.tractorbynet.com/forums/cub-cadet-l-g/...

That's exactly what I use. A tie rod/pitman arm "puller" puts pressure on the taper joint and protects the threads as well as the joint...

You haven't said what kind of paint is on the walls now. If it is an oil based paint, DO NOT use a water based paint to paint over...

I hired a professional painter to paint my house and I volunteered to help him. He used a sprayer in a way, that no other painter in the...

I paint a few houses every year. I'll be starting a new one next week. I have three different sprayers, and they are great for certain...

First thing I'd do is install a metal paper clip in the OPC (seat switch). While I own a few Kubota's not familiar with that moedl, Is...

I have looked that Hart leaf collector and I think it is way overpriced. Plus I have read reviews of the leaf collector. They were not...

Well, the crank circuit runs through the PTO and brake switches via the purple wires. Those are what I see the connectors fail on the...

If you have access to a press, then it is not a bad job to remove the old and put in new. With the deck belt off, you may be able to...

Tony, Welcome to TBN. I don't have an answer for you, but hopefully, someone will come along and help you. Richard

This is the mower I have. It is now marked down $500 from what I paid and they are offering a 10% discount for your first order...

I do love this mower because of its near silent operation, no engine warm up, you can get off and leave it and makes no difference. The...

Welcome to TBN. Is your tractor acting up ? Richard

I'd try jumping the dead battery with a jumper wire from a good battery of some sort. It only needs small bump for it to register on...