repete's latest activity

For as frequently as I use mine I need a holster...

I also carry a IR temperature gun in my truck and check my hubs regularly.

I do the same. I have three towing trucks so any type of electronic setup would be challenging. Those point and shoot thermometers work...

I log at least 3,800mi towing per year. Alot more than 1,000mi in 6yrs. I'm just carefull about not pulling over on the shoulder, not...

Mine shuts down if it is beyond the ability to self level. I also check mine against a water level at about 75'. Set one end of the...

Best of luck. Keep us apprised of your progress. It looks like pictures of some sort of linkage from the Titanic.

Sounds like a piece of heat shrink tube on the brake pin would be good insurance, if it would allow the case to close, some of them have...

This sounds like "They're all like that". Uh no. Maybe it's just your taste in women? Married 50+ years here. And none of that...

Have you sprayed all of the joints with penetrating oil and GENTLY tapped the linkage back and forth to see if you can get any movement...

See if you can back off the clutch adjustment to create free play in the clutch linkage assembly. It might be a process of elimination...

If the clutch disc is stuck the throw out bearing should still release and get movement. Do you have an inspection plate on the right...

Spray your oil on the OUTSIDE of the shaft where it enters the housing. Probably a good thing you didn't find an access plate. Spraying...

Is this to be switched with the ignition or hot all the time? If hot all the time, just add what bcp suggests. If it is to be switched...

Which hose did the previous owner replace?

He has a burr up his A-- about something or another.