repete's latest activity

My experience has been that it's easier to mix one bag at a time. A bucket full of concrete would be a lot to have to mix at once...

Any grease vs no grease. Any grease wins. :)

Should be a drain plug on the bottom of the gearbox. If it'e leaking, the Corn head grease. If it's not, any gear oil, brand irrevelant.

80-90 vs 75-90, not difference in my mind. The fact is it is going to really like regular changes with clean grease. I have for years...

I have an old 5' brush hog I use for mowing rough stuff. I do not know the maker. My question is are the blades and bolts generic for...

Hi, Background: Here is a project I started about 2 years ago. Since I retired (2016) I've wanted to build a rotary cutter that...

Like so:

Maybe a new gasket is in order...

You can do what I do. Leave it in 2WD and go somewhere and get stuck. Put it in 4WD and if you are still stuck it is not working. :)

I have seen belly pans used for this application. A piece of corrugated sheet steel works reasonably well and is slippery.

I know it will not help much for the problem you are describing but I usually put the retainer clips for the pins on top of the...

I agree with Dodge Man I cannot make heads or tails of the picture. I have found that when fluid gets too low you can begin to add air...

Grease that shaft. When the shear pin goes you want it to spin freely and not destroy the shaft or yoke. As I look at it, it appears it...

Some pictures would be worth a lot of words here.

I use a long bolt and double nut it so I put no pressure on the coupling itself. Make REAL SURE your PTO shaft is adjusted to the...