Recent content by RADIUM

Well so far I can report that the tractor's been excellent needs a little adjusting of the clutch but the dealer will take care of that there is some procedure in the manual that states how you set it up with the computer screens and allow it to running calibration test but considering it has to...

Wiring the lights on the loader today I found an interesting thing inside New Holland ran the wire for the side markers without any loom or any protection going through a sharp protrusion of Steel. I would give that about 2 years before It would cut through and then your lights wouldn't work it...

Yes it's a nice tractor it's really not that much bigger than the workmaster overall just a little more flow on the Hydraulics and of course the engine horsepower being a four-cylinder. If I had to do it again and I had really planned to buy a tractor instead of just dealing with the problems of...

One other thing had to make little extensions for the power since they moved a little further out God forbid they give you enough cable to move 2 in to the left or right LOL

A few more updates really enjoy the new tractor lots of power love the PTO slow on slow off. I've also taken off the factory front cab lights which I find ridiculous that they're right in the side of you looking out the glass I moved them to the side with my own brackets much stronger and of...

The beacon really saved me a fortune that bracket was only $19 and it's like it was made to be there it perfectly sticks up above the top of the roof for winter snow blowing and easily can be removed and it's LED New Holland is still using bulbs for the spinning motor terrible

Greetings after 2 years of nothing but disappointment with the workmaster 75 between breakdowns and PTO issues which I've had another threads I figured I'd start a new thread to ask some questions about the new Power Star 120. If anyone out there has one I love to know if you know the interior...

Yes it's definitely more tractor than an old retired guy needs but I got it for a really good price and with the 0% financing it was worth doing. The sad truth is the workmaster 75 is a very good tractor handle everything I asked it to do without issue even an oversized offset flail which the...

I'm glad it worked out for you sorry it's been a while but I solved all my trouble after dealing with New Holland on many occasions and having other issues including another problem with the computer I agreed to trade the tractor out and got a pretty good deal as I often State my dealer takes...

(y)

Thank you for all the replies and believe me if I couldn't change the back hydraulic pump tubing I would definitely do a relocation kit the only problem with that especially on a tractor is vibration shaking always in the back of your head that another thing could leak and blow a motor up with...

Yes at least a half a gallon by the time we figured out that the moving the line over a little bit was not going to work and then realizing that the rubber ring inside was now torn between driving to the dealer getting a new o-ring and closing it all up the bucket underneath was at least a half...

I'm sure I could rebuild the motor if I had to I and replace the clutch grew up on a farm my entire life. The point of the story is why would you design something that's going to require at least a half a gallon of expensive hydraulic fluid that line is deceiving it's almost 2 inches...

Wow how stupid

Looking even closer at 12 minutes and 7 Seconds you can see there's no pipe coming up it goes down and underneath perhaps they can put that on my tractor the return line